HP Netsight manual To set the default community name

Overview of NetSight Element Manager

Figure 2-8. The Network Options

NetSight Element Manager uses the Community Name to gain access to devices that you want to manage. You specify the community name you want to use to access a device when the device is inserted (as documented in Chapter 4, List Views) or discovered (as documented in Chapter 3, Discovering Nodes). You can also change the community name NetSight Element Manager uses to communicate with a device via the Device Properties windows (also documented in Chapter 4, List Views). For full device management, you should select a community name which provides super user access.

The community name set in the Network Options window serves as the default value entered in any field which requires a community name; however, you can always enter a specific community name on a case-by-case basis in any of the windows that require one.

NOTE

To check whether a device is active on the network — and consequently to turn the device icon green on Map Views, List Views, and Tree Views — NetSight Element Manager issues polls for device interface information. This type of poll does not require community name access to the device, since it is merely a check of network health. If you cannot access a device’s management windows — even though its icon appears green on the map

—check that the community name you are using to access the device still has valid read, read/write, or super user access.

To set the default community name:

1.Click in the Community Name text field, and type in a community name which will be used as NetSight Element Manager’s default value.

See your local management documentation or the Remote Administration Tools User’s Guide included with your documentation for more information on community names.

2-16 Customizing NetSight Element Manager