HP Netsight manual Status Groups

Tree Views

See Chapter 3, Discovering Nodes, for more information on creating and using subnet

TIP entries.

Status Groups

Any DLM Status Groups you have created will be displayed in this list box. You can choose to display only those nodes which are part of one or more selected status groups, or those which are part of any defined status group.

Enterprises

The Enterprise category allows you to filter nodes by hardware or software manufacturer. The vendor codes available for filtering are Cabletron, 3Com, Cisco Systems, Novell, Silicon Graphics, IBM, Sun Microsystems, Hewlett-Packard, Microsoft, Xyplex, Cayman, Digital, Compaq, and Enterasys. You can also choose to filter on nodes whose vendor code is unknown.

Classes

Lists the functional classes that NetSight Element Manager can detect. Classes available for filtering include:

•	Repeater	•	Router	•	Generic Bridge
•	Router/Gateway	•	Ethernet/Token Ring Bridge	•	Switch
•	Ethernet/FDDI Bridge	•	Ethernet/WAN Bridge	•	PBX
•	Multi-Topology Bridge	•	FDDI Concentrator	•	Terminal Server
•	Server	•	ATM

Nodes which support more than one functional class will be displayed in any view for which one of its classes is selected. You can also choose to filter on nodes whose functional class is unknown.

Topologies

Lists the topologies that NetSight Element Manager will recognize. Topologies listed include:

•	Regular 1822	•	HDH 1822	•	Local Talk
•	RFC 877 X.25	•	Ethernet CSMACD	•	ISO 8802.3
•	ISO 8802.6 MAN	•	ISO 88022 LLC	•	3 Mbit Ethernet
•	StarLAN	•	Token Bus	•	Token Ring
•	HyperChannel	•	FDDI	•	Lap B
•	T1	•	T-3	•	E1
•	Basic ISDN	•	Primary ISDN	•	PPP
•	Serial Line IP	•	CLNP/IP	•	XNS/IP

5-14 Creating and Editing Tree Views