Akai Ewi4000s Adjusting the Volumes, „ Adjusting the Main Volume, „ Adjusting the Reverb Volume

Page 23

ADJUSTING THE VOLUMES

„Adjusting the Main Volume

This procedure adjusts the EWI4000s’s main output volume value (01-30).

1.Press and hold the LEVEL BUTTON. The current volume value will be shown on the PROGRAM /

DATA DISPLAY.

2.While holding the LEVEL BUTTON, adjust the volume by pressing the HOLD BUTTON (which increases the volume value) or OCTAVE BUTTON (which decreases the volume value).

„Adjusting the Volume of Each Program

This procedure adjusts the output volume of each Program individually, as opposed to the main output volume. The volume setting of each Program is stored in the EWI4000s.

1.Select the Program whose volume you want to adjust.

2.While holding the LEVEL BUTTON, press the SETUP BUTTON. The current volume value will be shown on the PROGRAM / DATA DISPLAY.

3.Adjust the volume by pressing the HOLD BUTTON (which increases the volume value) or OCTAVE BUTTON (which decreases the volume value).

4.Press the SETUP BUTTON. The EWI4000s will return to Play Mode, and your settings will be stored internally.

ADJUSTING THE EFFECTS VOLUMES

In addition to adjusting the normal volume of he EWI4000s, you can also adjust the volume levels of its effects, including Reverb, Delay, and Chorus.

The controls involved in these procedures are shown here.

„Adjusting the Reverb Volume

This procedure adjusts the overall volume of the EWI4000s’s Reverb effect.

1.Press and hold the FX BUTTON. The current Reverb effect volume will be shown on the PROGRAM /

DATA DISPLAY.

2.While holding the FX BUTTON, adjust the volume by pressing the HOLD BUTTON (which increases the volume value) or OCTAVE BUTTON (which decreases the volume value).

21

Image 23
Contents Reference Manual Page Portable Cart Warning Important Safety InstructionsFCC Warning Table of Contents Introduction FeaturesTOP Panel Parts & FunctionsSide / Rear Panel „ Glide Plate Section „ Program / Data Display Section„ Cable Clutch Section „ Bend Plate Section„ AC adapter Power„ Using Battery Power Connections „ Grounding Plates Basic OperationBasic Operation „ Note Keys „ Octave Shift Rollers„ Pitch Bend Plates „ Mouthpiece„ Vibrato „ Tonguing„ Hold Button and Octave Button Adjusting the Sensitivity of the Sensors„ Adjusting the Pitch Bend Sensors „ Adjusting the Breath Sensor„ Adjusting the Glide Sensor „ Adjusting the Vibrato Sensor„ a Note About Adjusting Your Sensors „ Adjusting the Touch SensorsFingering Modes „ Assigning a Program Number to a Note Key Internal SoundProgram KEY Functions „ Selecting the Internal Sounds Program Key„ Recalling the Program Number Assigned to a Note Key „ Setting Program Change Preferences„ Program Down with the Octave Button „ Program Up with the Hold Button„ Adjusting the Reverb Volume Adjusting the Volumes„ Adjusting the Main Volume „ Adjusting the Volume of Each Program„ Adjusting the Chorus Effect On/Off on Each Program „ Adjusting the Reverb Effect Volume of Each Program„ Adjusting the Delay Effect Volume of Each Program „ Assigning Functions to the Octave Button Octave Button FunctionsHold Button Functions „ Assigning Functions to the Hold Button „ Assigning Functions to the Glide Plate Pitch Bend Plate FunctionsGlide Plate Functions „ Assigning Functions to the Pitch Bend Plates„ Setting the Glide Effect Time & Rate Adjusting the KEY DelayEditing the Internal Sound with Your Computer TuningTranspose Function Trans Button „ Midi Program Change About MidiTransmitted Information from the EWI4000s Midi OUT „ Changing the Breath Sensor Output „ Changing the Midi Channel„ Changing the Vibrato Sensor Output to Another Midi Event „ Setting the Midi Velocity Value„ Sending an All Notes Off Message „ Setting the Hold Function Hold Button on Midi Transmit„ Setting the Glide Plate Function on Midi Transmit „ Sending a Midi Panic Message to Reset All ControllersLevel master Level preset Reverb master Restoring the Factory Presets„ The Left Hand Miscellaneous NotesEVI Fingerings „ The Right Hand„ Basic EVI Fingerings Software UpdatingTroubleshooting Octave Shift Rollers Fingering ChartsEWI Fingerings Saxophone Fingerings Flute Fingerings Oboe Fingerings EVI Fingerings Transmit/Export Recognize/Import Remarks Midi Implementation ChartOctave Menu StructureGlide Parameter Range Defaults Update Control Protocol OFF Sound Module SpecificationsPage