SECTION 3: USINGYOUR CHAR GLO® BARBECUE
MANUAL LIGHTING INSTRUCTIONS**
– Read Before Lighting –
Follow these steps to light the Main Burners manually:
1.Turn off all the burners.
2.Wait 5 minutes to allow any accumulated gas to dissipate.
Middle section
of radiant
Access Hole for Manual Lighting
Use a long stem match to light manually:
3.Remove the grill grates.
4.Find the ports on top of the burner by looking through the opening at the end of the radiant.
Keep your hands and face as far away from the burner as possible.
5.Place the lighted
6.Turn the knob to the LITE position. The burner will light within 4 to 10 seconds.
Follow these steps to light the Smoker manually:
1.Turn off all the burners.
2.Wait 5 minutes to allow any accumulated gas to dissipate.
3.Remove the smoker tray.
4.Find the ports on top of the smoker. Keep your hands and face as far away from the burner as possible.
5.Place the lighted match through the opening for the smoker tray and next to the burner ports.
6.Turn the knob to the LITE position. The burner will light within 4 to 10 seconds.
**NOTE: The infrared rotisserie burner can- not be lit manually.
Page 13