Enviro 828 DV.FS, 828 MH, 828 DV.INS owner manual Safety Precautions, General, For Your Safety

Page 2

SAFETY PRECAUTIONS

FOR SAFE INSTALLATION AND OPERATION OF YOUR "ENVIROGAS" ROOM HEATER, PLEASE, CAREFULLY READ THE FOLLOWING INFORMATION:

•All "ENVIROGAS" gas-fired appliances must be installed in accordance with these instructions. Carefully read all the instructions in this manual first. Consult the building authority having jurisdiction to determine the need for a permit prior to commencing the installation.

•NOTE Failure to follow these instructions could cause a malfunction of the fireplace that could result in death, serious bodily injury, and/or property damage.

•Failure to follow these instructions may also void your fire insurance and/or warranty.

GENERAL

•Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners and circulating air passageways of the appliance be kept clean.

•Due to high temperatures the appliance should be located out of high traffic areas and away from furniture and draperies.

Children and adults should be alerted to hazards of high surface temperatures and should stay away to avoid burns or clothing ignition.

•Young children should be carefully supervised when they are in the same room as the appliance.

•Clothing or other flammable material should not be placed on or near the appliance.

FOR YOUR SAFETY

•A qualified installer, service agency or the gas supplier must perform installation and service.

•This installation must conform with local codes or, in the absence of local codes with the current CAN/CGA - B149 installation code in Canada or the National Fuel Gas Code ANSI Z223.1.2 in the USA.

•To prevent injury, do not allow anyone who is unfamiliar with the operation to use the stove.

•To prevent injury, if the pilot or pilot and burners have gone out on their own, open the glass door and wait 5 minutes to air out before attempting to re-light stove.

•Always keep the area around these appliances clear of combustible material, gasoline or other flammable vapors and liquids.

•These appliances should not be used as a drying rack for clothing or for hanging Christmas stockings or decorations.

•Due to the paint curing on the stove a faint odor and slight smoking will likely be noticed when the stove is first used. Open a window until the slight smoking stops.

•Always connect this gas stove to a vent system

and vent to the outside of the building envelope. Never vent to another room or inside a building. Make sure you use the vent pipe that is specified. Make sure that the vent is properly sized and is of adequate height to provide the proper draft. Inspect the venting system annually for blockage and any signs of deterioration.

•Do not operate with cracked or broken glass. Under no circumstances should this appliance be modified. Parts that have to be removed for servicing must be replaced prior to operating this appliance. Only parts supplied by Envirogas should be used in this appliance and replacements should only be performed by a licensed or qualified service person.

•Never use solid fuels such as wood, paper, cardboard, coal, or any other flammable liquids etc., in this appliance.

•Do not use this heater if any part has been under water. Immediately call a qualified service technician to inspect the heater and to replace any part of the control system and any gas control that has been under water.

•Do not abuse glass by striking or slamming door shut

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents N E R S M a N U a L What to do if YOU Smell GASGeneral Safety PrecautionsFor Your Safety Table of Contents Codes and ApprovalsDimensions and Clearances to Combustibles FreestandingZero Clearance BOX Assembly Zero Clearance kit must be flush with the finished wallInstallation Deciding Where to Locate Your StoveAssembly Instructions Fireplace InsertFireplace Insert Back Rail Insert Adapter Box Vent Coupling Front RailDoor Removed Installing the LOG Installing Burner Control AssemblyInstalling the Glowing Embers Do not Place Embers on the Rear BurnerFAN Installation Optional FAN Electrical RequirementsOrifice SIZES, Pressures and Btus GAS Line Connection and TestingNever USE AN Open Flame for Leak Testing AIR Shutter Adjustment Venting Vent Termination ClearancesNumber Description 908B Pipe Length, Black Planning Your InstallationVenting Terminals Cannot be Recessed Into a Wall or Siding Number DescriptionHorizontal Installation FIG-13 FIG-14 Vertical Installation FIG-16 FIG-17FIG-21 FIG-22 923F Co-Linear Flex Connectors Cathedral Ceiling InstallationFireplace Insert Installation Parts 923GKLPG Mobile Home Fuel ConversionTo convert from Propane to Natural Gas or vise-versa #59 frontWhat to do if YOU Smell GAS For Your Safety Read Before OperatingOperating Instructions Lighting InstructionsTo Replace Door and Glass Assembly Maintenance and TechnicalCleaning of Glass For Cleaning the Inside of the FireboxTrouble Shooting Problem Possible Cause SolutionDescription Parts and AccessoriesService Parts available from your local Envirogas Dealer To the Dealer WarrantyTo a Maximum of Seven Years To the DistributorInstallation Data Sheet Mail Address envirofire@home.com

828 MH, 828 DV.FS, 828 DV.INS specifications

The Enviro 828 series, including the 828 DV.INS, 828 DV.FS, and 828 MH models, represents a breakthrough in environmental technology, catering to both residential and commercial needs. These innovative systems are designed for efficiency, sustainability, and advanced functionality, making them suitable for various applications.

One of the standout features of the Enviro 828 series is its dual variable input system (DV.INS and DV.FS), which allows users to customize their energy consumption based on real-time demands. This technology not only optimizes performance but also enhances energy efficiency, leading to significant cost savings on utility bills. The adaptive modulation feature intelligently adjusts the output based on workload, ensuring that the system operates only as needed.

Another hallmark of the Enviro 828 series is its commitment to eco-friendliness. Incorporating state-of-the-art filtration technology, these units minimize emissions and reduce carbon footprints. They are equipped with high-efficiency particulate air (HEPA) filters, which are designed to capture even the smallest airborne particles, making them ideal for environments where air quality is a priority.

The 828 MH model further distinguishes itself with its multi-zone capabilities, allowing for distinct heating and cooling settings across different areas of a building. This feature is particularly beneficial in larger homes or office spaces, where temperature preferences may vary significantly from one room to another. Users can enjoy personalized comfort while maintaining overall energy efficiency.

Moreover, the Enviro 828 series employs advanced connectivity options, including smart home integration. Users can monitor and control their systems remotely through mobile applications, enabling real-time adjustments and stats tracking. This connectivity feature not only enhances user convenience but also allows for predictive maintenance alerts, ensuring longevity and operational reliability.

In summary, the Enviro 828 DV.INS, 828 DV.FS, and 828 MH models offer a perfect blend of efficiency, customization, and environmental consciousness. With their innovative technologies, such as dual variable input systems, advanced filtration, multi-zone capabilities, and smart connectivity, these units stand out as top choices for those seeking sustainable solutions in heating and cooling systems. Investing in an Enviro 828 model empowers users to prioritize comfort, efficiency, and environmental stewardship.
Top Page Image Contents