Enviro 828 DV.INS, 828 MH, 828 DV.FS Dimensions and Clearances to Combustibles, Freestanding

Page 4

2. DIMENSIONS AND CLEARANCES TO COMBUSTIBLES

FIREPLACE INSERT: The stove can only be installed in a solid fuel burning fireplace .

Mantle pillar to stove

10”

 

Stove top to 8” wide mantle

12”

Minimum firebox size W 26” x H 20” x D 20”

(NOTE; standard size shown – optional 33”H x 46”W available)

FREESTANDING:

Side wall to stove Rear wall to stove Combustible to stove Top Floor to stove

Corner clearance

Alcove depth

10"

4"

22"

0"

2"

48"

Maintain sufficient clearances for service and maintenance

FIREPLACE INSERT / WITH ZERO CLEARANCE KIT ( Part # 828- 134 )

After deciding where to locate the fireplace insert you must frame an opening to except the Zero Clearance Box to reduce the clearance to combustibles. The framing dimensions are as follows; 32 1/4” wide, 29 3/8” high and a depth of 14 3/4”.

The header at the top front of the opening must be a 2x4 on edge or a cut out in the 2x4 to maintain clearances to combustibles to the vent pipe. A minimum of 1 1/2” clearance must be maintained to the vent pipe.

Before you install the Zero Clearance Box you must determine the finished hearth height.(including tiles, subfloor, etc.)

The bottom of the box must be the same height as the finished hearth height.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents N E R S M a N U a L What to do if YOU Smell GASFor Your Safety Safety PrecautionsGeneral Table of Contents Codes and ApprovalsDimensions and Clearances to Combustibles FreestandingZero Clearance BOX Assembly Zero Clearance kit must be flush with the finished wallDeciding Where to Locate Your Stove Assembly InstructionsInstallation Fireplace InsertFireplace Insert Back Rail Insert Adapter Box Vent Coupling Front RailInstalling Burner Control Assembly Installing the Glowing EmbersDoor Removed Installing the LOG Do not Place Embers on the Rear BurnerFAN Installation Optional FAN Electrical RequirementsNever USE AN Open Flame for Leak Testing GAS Line Connection and TestingOrifice SIZES, Pressures and Btus AIR Shutter Adjustment Venting Vent Termination ClearancesPlanning Your Installation Venting Terminals Cannot be Recessed Into a Wall or SidingNumber Description 908B Pipe Length, Black Number DescriptionHorizontal Installation FIG-13 FIG-14 Vertical Installation FIG-16 FIG-17FIG-21 FIG-22 Cathedral Ceiling Installation Fireplace Insert Installation923F Co-Linear Flex Connectors Parts 923GKMobile Home Fuel Conversion To convert from Propane to Natural Gas or vise-versaLPG #59 frontFor Your Safety Read Before Operating Operating InstructionsWhat to do if YOU Smell GAS Lighting InstructionsMaintenance and Technical Cleaning of GlassTo Replace Door and Glass Assembly For Cleaning the Inside of the FireboxTrouble Shooting Problem Possible Cause SolutionService Parts available from your local Envirogas Dealer Parts and AccessoriesDescription Warranty To a Maximum of Seven YearsTo the Dealer To the DistributorInstallation Data Sheet Mail Address envirofire@home.com

828 MH, 828 DV.FS, 828 DV.INS specifications

The Enviro 828 series, including the 828 DV.INS, 828 DV.FS, and 828 MH models, represents a breakthrough in environmental technology, catering to both residential and commercial needs. These innovative systems are designed for efficiency, sustainability, and advanced functionality, making them suitable for various applications.

One of the standout features of the Enviro 828 series is its dual variable input system (DV.INS and DV.FS), which allows users to customize their energy consumption based on real-time demands. This technology not only optimizes performance but also enhances energy efficiency, leading to significant cost savings on utility bills. The adaptive modulation feature intelligently adjusts the output based on workload, ensuring that the system operates only as needed.

Another hallmark of the Enviro 828 series is its commitment to eco-friendliness. Incorporating state-of-the-art filtration technology, these units minimize emissions and reduce carbon footprints. They are equipped with high-efficiency particulate air (HEPA) filters, which are designed to capture even the smallest airborne particles, making them ideal for environments where air quality is a priority.

The 828 MH model further distinguishes itself with its multi-zone capabilities, allowing for distinct heating and cooling settings across different areas of a building. This feature is particularly beneficial in larger homes or office spaces, where temperature preferences may vary significantly from one room to another. Users can enjoy personalized comfort while maintaining overall energy efficiency.

Moreover, the Enviro 828 series employs advanced connectivity options, including smart home integration. Users can monitor and control their systems remotely through mobile applications, enabling real-time adjustments and stats tracking. This connectivity feature not only enhances user convenience but also allows for predictive maintenance alerts, ensuring longevity and operational reliability.

In summary, the Enviro 828 DV.INS, 828 DV.FS, and 828 MH models offer a perfect blend of efficiency, customization, and environmental consciousness. With their innovative technologies, such as dual variable input systems, advanced filtration, multi-zone capabilities, and smart connectivity, these units stand out as top choices for those seeking sustainable solutions in heating and cooling systems. Investing in an Enviro 828 model empowers users to prioritize comfort, efficiency, and environmental stewardship.
Top Page Image Contents