Vermont Casting warranty VM508K / VM658K Assembly Procedures Knock Down Models

Page 1

VM508K / VM658K Assembly Procedures

Knock Down Models

Tools Required: Knife or scissors, Phillips or Robertson (square head) screwdriver, 7/16” and 3/8” wrench or ratchet. The use of a manual screwdriver is strongly recommended. A power drill may cause damage to the unit or stripping of the protective coating.

Model VM508K Shown

CAUTION: This grill is intended ONLY to be used as a cart model, this grill cannot be built into an enclosure.

CAUTION: The assembly of this grill requires two (2) people.

WARNING: Some parts may have sharp edges; to avoid injury, wearing gloves during assem- bly, lifting or moving the grill is recommended. Protective eyewear and long sleeves are also strongly recommended.

NOTE: Remove the protective plastic coating from the stainless steel, failure to do so will void the warranty.

50004825 12/07 Rev. 3 En

Image 1

Contents VM508K / VM658K Assembly Procedures Knock Down Models USA CanadaMonday to Friday 900 A.M. to Unpack Carton and Verify Contents VM658K VM658K Carton ContentsAttach Four Metal Corner Posts to the Bottom Panel Attach Casters to Bottom PanelParts Required Attach Door Upper Brace to the Front of the Unit Attach Brace Support to Metal Corner PostAttach Back Panel & Tank Support Attach Door Assembly and Door HandleAttach Grease Cup Holder Screws Attach SkirtStep Attach Grease Catching Components Attach Side PanelsAttach Grill to Cabinet Assembly Secure Hose to the Cabinet Secure Hose to Upper Door Brace Model VM508KParts Required Right Side Shelf Left Side Shelf Steps 14 & 15 Right & Left Side Shelf AssemblyParts Required Right Shelf Assembly Attach Right Shelf Assembly to GrillParts Required Left Shelf Assembly Attach Left Shelf Assembly to GrillAttach Knobs If not installed Attach Side Burner AssemblyInstall the Battery Install the Backlighting BatteriesFigures 22 Install the Internal ComponentsInterior Shelf Installation Install Natural Gas Supply Line Natural Gas NG Models only Install the LP Cylinder LP Models onlyCFM Corporation

VM508K specifications

The Vermont Casting VM508K is a sophisticated and highly efficient wood stove that embraces both traditional craftsmanship and modern technology to provide an exceptional heating experience. This model is particularly favored for its ability to combine aesthetic appeal with functional efficiency, making it a great addition to any home.

One of the standout features of the VM508K is its impressive heating capability. With a maximum heat output of up to 75,000 BTUs, it can effectively warm spaces ranging from 1,200 to 2,500 square feet. This makes it a suitable choice for both small and large living areas. The stove is designed to burn seasoned cordwood, offering a clean and sustainable fuel source while ensuring efficient heat production.

The VM508K incorporates the advanced Catalyst Combustion Technology, which enhances the stove's burning efficiency and reduces emissions. This technology ensures that the wood is burned at higher temperatures, leading to a cleaner burn and minimizing the amount of smoke released into the atmosphere. As a result, this stove not only meets but often exceeds the stringent EPA emissions standards, making it an environmentally friendly heating solution.

In terms of construction, the VM508K is built from high-quality cast iron, which not only provides durability and longevity but also ensures optimal heat retention and distribution. The stove features an elegant design with intricate detailing, making it a stylish centerpiece in any room. The large viewing window offers a mesmerizing view of the flames, enhancing the ambiance and comfort of the home.

Another notable characteristic of the VM508K is its user-friendly operation. It comes equipped with an easy-to-use air control system that allows users to adjust the combustion air supply effortlessly, optimizing the burn based on their heating needs. This ensures optimal performance and efficiency, providing consistent heat without excessive wood usage.

Additionally, the Vermont Casting VM508K is designed with ease of maintenance in mind. The ash pan feature allows for straightforward ash removal, making it simple to keep the stove clean and functional. Overall, the VM508K exemplifies the perfect blend of traditional aesthetics, modern technology, and efficient heating, resulting in a high-quality, reliable wood stove that can greatly enhance any living environment.