Vermont Casting VM508K warranty Attach Skirt, Screws

Page 9

Step 9: Attach Skirt

Parts Required:

(1)Skirt Left Assembly

(1)Skirt Right Assembly

(1)Skirt Front Assembly

(2)Skirt Corner Assemblies

(7)#10-24 x 3/8” Screws (50004268)

(4)Adjustable Leveling Glide

Figures 8 & 9

Screw-in two (2) adjustable leveling glides into hex threaded insert provided in front skirt assem- bly.

Screw-in one (1) adjustable leveling glide into hex threaded insert provided in left and right skirt assemblies.

VM508K / VM658K Assembly

Leveling Glide

Skirt Front Assembly

Skirt Left Assembly

Skirt Right Assembly

Figure 8

Inverted View

B148

Attach left skirt assembly to the unit:

–Loosen one hex bolt from corner post. (Refer to Corner Post Detail)

–Place left skirt assembly on the top of the bottom panel,

–Secure left skirt assembly with two (2) #10-24 x 3/8” screws.

– Tighten hex bolt at the back of the unit.

Repeat these steps for right side.

Figure 9

 

Slide two (2) skirt corner assemblies into the front

 

skirt assembly. Slide above assembly into at-

 

tached left and right skirt assemblies. Secure

 

all skirt assembly parts with three (3) #10-24 x

Skirt Left

3/8” screws.

Assembly

Corner Post Detail

 

#10-24 x 3/8” Screw (50004268)

Loosen Outer

Bolt at Back Side

B149

Skirt Front Assembly

Skirt Right

Assembly

Skirt Corner Assembly

CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov- ing the grill is recommended.

50004825

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents VM508K / VM658K Assembly Procedures Knock Down Models Canada USAMonday to Friday 900 A.M. to Unpack Carton and Verify Contents VM658K VM658K Carton ContentsAttach Casters to Bottom Panel Attach Four Metal Corner Posts to the Bottom PanelParts Required Attach Door Upper Brace to the Front of the Unit Attach Brace Support to Metal Corner PostAttach Back Panel & Tank Support Attach Door Assembly and Door HandleAttach Grease Cup Holder Screws Attach SkirtStep Attach Grease Catching Components Attach Side PanelsAttach Grill to Cabinet Assembly Secure Hose to the Cabinet Secure Hose to Upper Door Brace Model VM508KParts Required Right Side Shelf Left Side Shelf Steps 14 & 15 Right & Left Side Shelf AssemblyParts Required Right Shelf Assembly Attach Right Shelf Assembly to GrillParts Required Left Shelf Assembly Attach Left Shelf Assembly to GrillAttach Knobs If not installed Attach Side Burner AssemblyInstall the Battery Install the Backlighting BatteriesFigures 22 Install the Internal ComponentsInterior Shelf Installation Install Natural Gas Supply Line Natural Gas NG Models only Install the LP Cylinder LP Models onlyCFM Corporation

VM508K specifications

The Vermont Casting VM508K is a sophisticated and highly efficient wood stove that embraces both traditional craftsmanship and modern technology to provide an exceptional heating experience. This model is particularly favored for its ability to combine aesthetic appeal with functional efficiency, making it a great addition to any home.

One of the standout features of the VM508K is its impressive heating capability. With a maximum heat output of up to 75,000 BTUs, it can effectively warm spaces ranging from 1,200 to 2,500 square feet. This makes it a suitable choice for both small and large living areas. The stove is designed to burn seasoned cordwood, offering a clean and sustainable fuel source while ensuring efficient heat production.

The VM508K incorporates the advanced Catalyst Combustion Technology, which enhances the stove's burning efficiency and reduces emissions. This technology ensures that the wood is burned at higher temperatures, leading to a cleaner burn and minimizing the amount of smoke released into the atmosphere. As a result, this stove not only meets but often exceeds the stringent EPA emissions standards, making it an environmentally friendly heating solution.

In terms of construction, the VM508K is built from high-quality cast iron, which not only provides durability and longevity but also ensures optimal heat retention and distribution. The stove features an elegant design with intricate detailing, making it a stylish centerpiece in any room. The large viewing window offers a mesmerizing view of the flames, enhancing the ambiance and comfort of the home.

Another notable characteristic of the VM508K is its user-friendly operation. It comes equipped with an easy-to-use air control system that allows users to adjust the combustion air supply effortlessly, optimizing the burn based on their heating needs. This ensures optimal performance and efficiency, providing consistent heat without excessive wood usage.

Additionally, the Vermont Casting VM508K is designed with ease of maintenance in mind. The ash pan feature allows for straightforward ash removal, making it simple to keep the stove clean and functional. Overall, the VM508K exemplifies the perfect blend of traditional aesthetics, modern technology, and efficient heating, resulting in a high-quality, reliable wood stove that can greatly enhance any living environment.
Top Page Image Contents