Vermont Casting VM508K Attach Left Shelf Assembly to Grill, Parts Required Left Shelf Assembly

Page 15

VM508K / VM658K Assembly

Step 17: Attach Left Shelf Assembly to Grill

Parts Required:

Left Shelf Assembly

(1) Left Shelf Assy. (Step 6)

(4)1/4-20 x 1¹⁄₂” Screws (50001383)

(4)#10-24 x 1/2” Screws (50000337)

(1)Marinating Station Tray Plastic

(1)Heat Shield Marinating Tray

(2)#10-24 K-lock Nut (50000182)

Refer to Figures 15 & 16 for shelf assembly attach-

ment

Figure 17

Refer to Figures 17 & 18 for heat shield and mari-

 

nating station installation

 

#10-24 K-lock Nuts (50000182)

Loosely screw in (4-5 turns) four (4) 1/4-20 x 1¹⁄₂” screws to the side of the grill.

Place left shelf assembly onto screws.

Secure (tighten) four (4)

#10-24 x 1/2” Screws

 

screws to the grill.

 

(50000337)

 

Secure condiment tray

 

 

 

to the console with

 

 

two (2) #10-24 x 1/2”

 

Heat Shield

screws.

 

Marinating Tray

Tighten two (2) remain-

 

 

ing screws. (from Step

 

 

15 and 16)

 

 

From inside grill, attach

B183

 

 

 

10-24 x 1/2” screw to

 

 

the left shelf assy.

 

Figure 18

Attach heat shield marinating tray to left side of grill. Insert two (2)

 

#10-24 x 1/2” screws through grill side and secure with two (2) #10-

 

24 K-lock nuts. (Fig. 17)

 

 

Insert marinating station tray plastic into left side shelf. (Fig. 18)

Marinating

Tray

 

 

NOTE: For side shelf opening: if you have any problems opening or closing, loosen the hinge bolts and adjust.

For VM658K, install shelf light according to Electronics Installation Instructions, #50003699.

NOTE: For grill models with a marinating station: Loosen the two (2) bolts and nuts securing the heat shield marinating tray to the grill body. (Fig. 17) Attach the rotisserie motor bracket using the same mounting holes. Secure both the bracket and heat shield using bolts and nuts provided.

CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov- ing the grill is recommended.

50004825

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents VM508K / VM658K Assembly Procedures Knock Down Models Canada USAMonday to Friday 900 A.M. to Unpack Carton and Verify Contents VM658K VM658K Carton ContentsAttach Casters to Bottom Panel Attach Four Metal Corner Posts to the Bottom PanelParts Required Attach Door Upper Brace to the Front of the Unit Attach Brace Support to Metal Corner PostAttach Back Panel & Tank Support Attach Door Assembly and Door HandleAttach Grease Cup Holder Screws Attach SkirtStep Attach Grease Catching Components Attach Side PanelsAttach Grill to Cabinet Assembly Secure Hose to the Cabinet Secure Hose to Upper Door Brace Model VM508KParts Required Right Side Shelf Left Side Shelf Steps 14 & 15 Right & Left Side Shelf AssemblyParts Required Right Shelf Assembly Attach Right Shelf Assembly to GrillParts Required Left Shelf Assembly Attach Left Shelf Assembly to GrillInstall the Backlighting Batteries Attach Side Burner AssemblyAttach Knobs If not installed Install the BatteryFigures 22 Install the Internal ComponentsInterior Shelf Installation Install Natural Gas Supply Line Natural Gas NG Models only Install the LP Cylinder LP Models onlyCFM Corporation

VM508K specifications

The Vermont Casting VM508K is a sophisticated and highly efficient wood stove that embraces both traditional craftsmanship and modern technology to provide an exceptional heating experience. This model is particularly favored for its ability to combine aesthetic appeal with functional efficiency, making it a great addition to any home.

One of the standout features of the VM508K is its impressive heating capability. With a maximum heat output of up to 75,000 BTUs, it can effectively warm spaces ranging from 1,200 to 2,500 square feet. This makes it a suitable choice for both small and large living areas. The stove is designed to burn seasoned cordwood, offering a clean and sustainable fuel source while ensuring efficient heat production.

The VM508K incorporates the advanced Catalyst Combustion Technology, which enhances the stove's burning efficiency and reduces emissions. This technology ensures that the wood is burned at higher temperatures, leading to a cleaner burn and minimizing the amount of smoke released into the atmosphere. As a result, this stove not only meets but often exceeds the stringent EPA emissions standards, making it an environmentally friendly heating solution.

In terms of construction, the VM508K is built from high-quality cast iron, which not only provides durability and longevity but also ensures optimal heat retention and distribution. The stove features an elegant design with intricate detailing, making it a stylish centerpiece in any room. The large viewing window offers a mesmerizing view of the flames, enhancing the ambiance and comfort of the home.

Another notable characteristic of the VM508K is its user-friendly operation. It comes equipped with an easy-to-use air control system that allows users to adjust the combustion air supply effortlessly, optimizing the burn based on their heating needs. This ensures optimal performance and efficiency, providing consistent heat without excessive wood usage.

Additionally, the Vermont Casting VM508K is designed with ease of maintenance in mind. The ash pan feature allows for straightforward ash removal, making it simple to keep the stove clean and functional. Overall, the VM508K exemplifies the perfect blend of traditional aesthetics, modern technology, and efficient heating, resulting in a high-quality, reliable wood stove that can greatly enhance any living environment.
Top Page Image Contents