Vermont Casting VM508K warranty Interior Shelf Installation

Page 18

VM508K / VM658K Assembly

Step 23: Interior Shelf Installation

(Model VM658K)

Parts Required:

(2)#10-24 x 3/8” Screws (50004268

(1)Rod

(1)Washer Nylon (50000192)

(1)10-24 Pan Quad. Nut (10006126)

(1)Interior Shelf

Figure 24

Place two (2) 10-24 x 3/8” screws on the threaded holes located on left side panel. Install the rod in hole in bottom panel. Make sure the connection between the rod and the bottom panel is tight. Place washer nylon on top of rod. Slide interior shelf in place. Back flange edge of shelf slides into clip on back panel. Use 10-24 Pan Quad nut to secure interior shelf to rod.

Figure 24

Interior Shelf

#10-24 Pan Quad Nut

Shelf clip

#10-24 x 3/8” Screw

(50004268) Rod

B162

CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or moving the grill is recommended.

18

50004825

Image 18
Contents VM508K / VM658K Assembly Procedures Knock Down Models Canada USAMonday to Friday 900 A.M. to Unpack Carton and Verify Contents VM658K Carton Contents VM658KAttach Casters to Bottom Panel Attach Four Metal Corner Posts to the Bottom PanelParts Required Attach Brace Support to Metal Corner Post Attach Door Upper Brace to the Front of the UnitAttach Door Assembly and Door Handle Attach Back Panel & Tank SupportAttach Grease Cup Holder Attach Skirt ScrewsAttach Side Panels Step Attach Grease Catching ComponentsAttach Grill to Cabinet Assembly Secure Hose to Upper Door Brace Model VM508K Secure Hose to the CabinetSteps 14 & 15 Right & Left Side Shelf Assembly Parts Required Right Side Shelf Left Side ShelfAttach Right Shelf Assembly to Grill Parts Required Right Shelf AssemblyAttach Left Shelf Assembly to Grill Parts Required Left Shelf AssemblyInstall the Battery Attach Side Burner AssemblyAttach Knobs If not installed Install the Backlighting BatteriesInstall the Internal Components Figures 22Interior Shelf Installation Install the LP Cylinder LP Models only Install Natural Gas Supply Line Natural Gas NG Models onlyCFM Corporation

VM508K specifications

The Vermont Casting VM508K is a sophisticated and highly efficient wood stove that embraces both traditional craftsmanship and modern technology to provide an exceptional heating experience. This model is particularly favored for its ability to combine aesthetic appeal with functional efficiency, making it a great addition to any home.

One of the standout features of the VM508K is its impressive heating capability. With a maximum heat output of up to 75,000 BTUs, it can effectively warm spaces ranging from 1,200 to 2,500 square feet. This makes it a suitable choice for both small and large living areas. The stove is designed to burn seasoned cordwood, offering a clean and sustainable fuel source while ensuring efficient heat production.

The VM508K incorporates the advanced Catalyst Combustion Technology, which enhances the stove's burning efficiency and reduces emissions. This technology ensures that the wood is burned at higher temperatures, leading to a cleaner burn and minimizing the amount of smoke released into the atmosphere. As a result, this stove not only meets but often exceeds the stringent EPA emissions standards, making it an environmentally friendly heating solution.

In terms of construction, the VM508K is built from high-quality cast iron, which not only provides durability and longevity but also ensures optimal heat retention and distribution. The stove features an elegant design with intricate detailing, making it a stylish centerpiece in any room. The large viewing window offers a mesmerizing view of the flames, enhancing the ambiance and comfort of the home.

Another notable characteristic of the VM508K is its user-friendly operation. It comes equipped with an easy-to-use air control system that allows users to adjust the combustion air supply effortlessly, optimizing the burn based on their heating needs. This ensures optimal performance and efficiency, providing consistent heat without excessive wood usage.

Additionally, the Vermont Casting VM508K is designed with ease of maintenance in mind. The ash pan feature allows for straightforward ash removal, making it simple to keep the stove clean and functional. Overall, the VM508K exemplifies the perfect blend of traditional aesthetics, modern technology, and efficient heating, resulting in a high-quality, reliable wood stove that can greatly enhance any living environment.