Vermont Casting VM508K warranty Steps 14 & 15 Right & Left Side Shelf Assembly

Page 13

VM508K / VM658K Assembly

Steps 14 & 15: Right & Left Side Shelf Assembly

Parts Required:

 

 

Right Side Shelf

Left Side Shelf

(1)

Right Side Shelf

(1)

Left Side Shelf

(1)

Support Shelf Rear Right

(1)

Support Shelf Rear Left

(1)

Support Shelf Front Right

(1)

Support Shelf Front Left

(1)

Condiment Tray Right

(1)

Condiment Tray Left

(2)

U-Type Fastener (50001507)

(2)

U-Type Fastener (50001507)

(2)

#10-24 x 1/2” Screws (50000337)

(2)

#10-24 x 1/2” Screws (50000337)

(4)

#6-32 x 3/8” Screws (50002433)

(4)

#6-32 x 3/8” Screws (50002433)

NOTE: Remove protective layer from left and right shelf.

Figure 14

Right Side Shelf

Insert a U-type fastener to each support shelf. Place right side shelf on flat surface edges up.

Slide left and right support inside right side shelf. Ensure the flange of the support is to the inside of the right side shelf.

Place condiment tray at the front of the shelf.

Secure condiment tray to the support shelf with four (4) #6-32 screws. Loosely attach two (2) #10-24 x 1/2” screws to the U-type fasteners. Repeat steps for left side shelf.

Condiment Trays

Figure 14

#6-32 x 3/8” Screw

 

 

(50002433)

#10-24 x 1/2” Screws

U-Type Fastener

(50000337)

 

Support Shelf

 

Front

B160

 

U-Type Fastener Detail

 

Left Side Shelf

Right Side Shelf

 

U-Type Fastener

CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov- ing the grill is recommended.

50004825

13

Image 13
Contents VM508K / VM658K Assembly Procedures Knock Down Models USA CanadaMonday to Friday 900 A.M. to Unpack Carton and Verify Contents VM658K VM658K Carton ContentsAttach Four Metal Corner Posts to the Bottom Panel Attach Casters to Bottom PanelParts Required Attach Door Upper Brace to the Front of the Unit Attach Brace Support to Metal Corner PostAttach Back Panel & Tank Support Attach Door Assembly and Door HandleAttach Grease Cup Holder Screws Attach SkirtStep Attach Grease Catching Components Attach Side PanelsAttach Grill to Cabinet Assembly Secure Hose to the Cabinet Secure Hose to Upper Door Brace Model VM508KParts Required Right Side Shelf Left Side Shelf Steps 14 & 15 Right & Left Side Shelf AssemblyParts Required Right Shelf Assembly Attach Right Shelf Assembly to GrillParts Required Left Shelf Assembly Attach Left Shelf Assembly to GrillAttach Knobs If not installed Attach Side Burner AssemblyInstall the Battery Install the Backlighting BatteriesFigures 22 Install the Internal ComponentsInterior Shelf Installation Install Natural Gas Supply Line Natural Gas NG Models only Install the LP Cylinder LP Models onlyCFM Corporation

VM508K specifications

The Vermont Casting VM508K is a sophisticated and highly efficient wood stove that embraces both traditional craftsmanship and modern technology to provide an exceptional heating experience. This model is particularly favored for its ability to combine aesthetic appeal with functional efficiency, making it a great addition to any home.

One of the standout features of the VM508K is its impressive heating capability. With a maximum heat output of up to 75,000 BTUs, it can effectively warm spaces ranging from 1,200 to 2,500 square feet. This makes it a suitable choice for both small and large living areas. The stove is designed to burn seasoned cordwood, offering a clean and sustainable fuel source while ensuring efficient heat production.

The VM508K incorporates the advanced Catalyst Combustion Technology, which enhances the stove's burning efficiency and reduces emissions. This technology ensures that the wood is burned at higher temperatures, leading to a cleaner burn and minimizing the amount of smoke released into the atmosphere. As a result, this stove not only meets but often exceeds the stringent EPA emissions standards, making it an environmentally friendly heating solution.

In terms of construction, the VM508K is built from high-quality cast iron, which not only provides durability and longevity but also ensures optimal heat retention and distribution. The stove features an elegant design with intricate detailing, making it a stylish centerpiece in any room. The large viewing window offers a mesmerizing view of the flames, enhancing the ambiance and comfort of the home.

Another notable characteristic of the VM508K is its user-friendly operation. It comes equipped with an easy-to-use air control system that allows users to adjust the combustion air supply effortlessly, optimizing the burn based on their heating needs. This ensures optimal performance and efficiency, providing consistent heat without excessive wood usage.

Additionally, the Vermont Casting VM508K is designed with ease of maintenance in mind. The ash pan feature allows for straightforward ash removal, making it simple to keep the stove clean and functional. Overall, the VM508K exemplifies the perfect blend of traditional aesthetics, modern technology, and efficient heating, resulting in a high-quality, reliable wood stove that can greatly enhance any living environment.