Vermont Casting VM508K warranty Install the Internal Components, Figures 22

Page 17

VM508K / VM658K Assembly

Step 22: Install the Internal Components

Parts Required:

VM508K: (4) Sear Plates

(3)Cooking Grates

(1)Warming Rack

VM658K: (5) Sear Plates

(4)Cooking Grates

(1)Warming Rack

Figures 22 & 23

Carefully place each of the sear plates side by side inside the barbecue. Make sure the semicircular finger groove is facing toward the front of the grill. Each sear plate rests just above each burner tube.

Set the cooking grates, side by side, on the upper ledge of the grill tub. Make sure the finger groove is fac- ing toward the front of the grill.

Set the warming rack into the supports located on either side of the rear lid.

NOTE: One side of the grate surface is rounded and more suitable for meats. The other side is flat and more suitable for delicate foods (i.e. fish). The grates can be turned over according to your preference.

CAUTION: Do not attempt to turn the cooking grates over while the grill is in use and the grates are hot. Doing so could result in severe burns and other injuries.

Figure 23

Warming

Rack

Figure 22

Burner

Sear Plate

B251

Cooking

 

 

 

Grates

B120

 

 

CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov- ing the grill is recommended.

50004825

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents VM508K / VM658K Assembly Procedures Knock Down Models Monday to Friday 900 A.M. to CanadaUSA Unpack Carton and Verify Contents VM658K VM658K Carton ContentsParts Required Attach Casters to Bottom PanelAttach Four Metal Corner Posts to the Bottom Panel Attach Door Upper Brace to the Front of the Unit Attach Brace Support to Metal Corner PostAttach Back Panel & Tank Support Attach Door Assembly and Door HandleAttach Grease Cup Holder Screws Attach SkirtStep Attach Grease Catching Components Attach Side PanelsAttach Grill to Cabinet Assembly Secure Hose to the Cabinet Secure Hose to Upper Door Brace Model VM508KParts Required Right Side Shelf Left Side Shelf Steps 14 & 15 Right & Left Side Shelf AssemblyParts Required Right Shelf Assembly Attach Right Shelf Assembly to GrillParts Required Left Shelf Assembly Attach Left Shelf Assembly to GrillAttach Knobs If not installed Attach Side Burner AssemblyInstall the Battery Install the Backlighting BatteriesFigures 22 Install the Internal ComponentsInterior Shelf Installation Install Natural Gas Supply Line Natural Gas NG Models only Install the LP Cylinder LP Models onlyCFM Corporation

VM508K specifications

The Vermont Casting VM508K is a sophisticated and highly efficient wood stove that embraces both traditional craftsmanship and modern technology to provide an exceptional heating experience. This model is particularly favored for its ability to combine aesthetic appeal with functional efficiency, making it a great addition to any home.

One of the standout features of the VM508K is its impressive heating capability. With a maximum heat output of up to 75,000 BTUs, it can effectively warm spaces ranging from 1,200 to 2,500 square feet. This makes it a suitable choice for both small and large living areas. The stove is designed to burn seasoned cordwood, offering a clean and sustainable fuel source while ensuring efficient heat production.

The VM508K incorporates the advanced Catalyst Combustion Technology, which enhances the stove's burning efficiency and reduces emissions. This technology ensures that the wood is burned at higher temperatures, leading to a cleaner burn and minimizing the amount of smoke released into the atmosphere. As a result, this stove not only meets but often exceeds the stringent EPA emissions standards, making it an environmentally friendly heating solution.

In terms of construction, the VM508K is built from high-quality cast iron, which not only provides durability and longevity but also ensures optimal heat retention and distribution. The stove features an elegant design with intricate detailing, making it a stylish centerpiece in any room. The large viewing window offers a mesmerizing view of the flames, enhancing the ambiance and comfort of the home.

Another notable characteristic of the VM508K is its user-friendly operation. It comes equipped with an easy-to-use air control system that allows users to adjust the combustion air supply effortlessly, optimizing the burn based on their heating needs. This ensures optimal performance and efficiency, providing consistent heat without excessive wood usage.

Additionally, the Vermont Casting VM508K is designed with ease of maintenance in mind. The ash pan feature allows for straightforward ash removal, making it simple to keep the stove clean and functional. Overall, the VM508K exemplifies the perfect blend of traditional aesthetics, modern technology, and efficient heating, resulting in a high-quality, reliable wood stove that can greatly enhance any living environment.
Top Page Image Contents