Vermont Casting VM508K warranty Attach Side Burner Assembly, Attach Knobs If not installed

Page 16

VM508K / VM658K Assembly

Step 18: Attach Side Burner Assembly

Follow Side Burner Assembly Instructions to assemble side burner to unit.

Figure 19

Step 19: Attach Knobs (If not installed)

Parts Required:

VM508K: (5) Knobs

VM658K: (6) Knobs

Figure 19

 

NOTE: Depending on your model, your grill may

 

require 5 or 6 knobs. VM508 is equipped with five

B177

(5) knobs. VM658 is equipped with six (6) knobs.

 

Align the knobs on the valve stems and push in- ward until the knob sits snugly on the stem.

Step 20: Install the Battery

NOTE: Requires one (1) “AA” battery. (supplied)

Figure 20

Unscrew the ignition button from the console and in- sert the appropriate battery into the housing by plac- ing the positive side of the battery first. Then screw the ignition button back into the console.

Check for sparks under each main burner before proceeding.

Figure 20

� �

B178

Step 21: Install the Backlighting Batteries

NOTE: Eight (8) “AA” batteries are required for all grill models. (Not included)

Figure 21

Remove the battery case from the battery holder. Insert the eight (8) “AA” batteries. Attach battery case to back light wire connection. Reinstall battery case in battery holder with back light connector on the top.

WARNING: Replacing the battery incorrectly might result in an explosion. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used bat- teries according to your local environmental guidelines.

Figure 21

Battery Case

Battery Shroud

B245

CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or moving the grill is recommended.

16

50004825

Page 15 Page 17
Image 16
Page 15 Page 17
Contents VM508K / VM658K Assembly Procedures Knock Down Models USA CanadaMonday to Friday 900 A.M. to Unpack Carton and Verify Contents VM658K Carton Contents VM658KAttach Four Metal Corner Posts to the Bottom Panel Attach Casters to Bottom PanelParts Required Attach Brace Support to Metal Corner Post Attach Door Upper Brace to the Front of the UnitAttach Door Assembly and Door Handle Attach Back Panel & Tank SupportAttach Grease Cup Holder Attach Skirt ScrewsAttach Side Panels Step Attach Grease Catching ComponentsAttach Grill to Cabinet Assembly Secure Hose to Upper Door Brace Model VM508K Secure Hose to the CabinetSteps 14 & 15 Right & Left Side Shelf Assembly Parts Required Right Side Shelf Left Side ShelfAttach Right Shelf Assembly to Grill Parts Required Right Shelf AssemblyAttach Left Shelf Assembly to Grill Parts Required Left Shelf AssemblyAttach Side Burner Assembly Attach Knobs If not installedInstall the Battery Install the Backlighting BatteriesInstall the Internal Components Figures 22Interior Shelf Installation Install the LP Cylinder LP Models only Install Natural Gas Supply Line Natural Gas NG Models onlyCFM Corporation

VM508K specifications

The Vermont Casting VM508K is a sophisticated and highly efficient wood stove that embraces both traditional craftsmanship and modern technology to provide an exceptional heating experience. This model is particularly favored for its ability to combine aesthetic appeal with functional efficiency, making it a great addition to any home.

One of the standout features of the VM508K is its impressive heating capability. With a maximum heat output of up to 75,000 BTUs, it can effectively warm spaces ranging from 1,200 to 2,500 square feet. This makes it a suitable choice for both small and large living areas. The stove is designed to burn seasoned cordwood, offering a clean and sustainable fuel source while ensuring efficient heat production.

The VM508K incorporates the advanced Catalyst Combustion Technology, which enhances the stove's burning efficiency and reduces emissions. This technology ensures that the wood is burned at higher temperatures, leading to a cleaner burn and minimizing the amount of smoke released into the atmosphere. As a result, this stove not only meets but often exceeds the stringent EPA emissions standards, making it an environmentally friendly heating solution.

In terms of construction, the VM508K is built from high-quality cast iron, which not only provides durability and longevity but also ensures optimal heat retention and distribution. The stove features an elegant design with intricate detailing, making it a stylish centerpiece in any room. The large viewing window offers a mesmerizing view of the flames, enhancing the ambiance and comfort of the home.

Another notable characteristic of the VM508K is its user-friendly operation. It comes equipped with an easy-to-use air control system that allows users to adjust the combustion air supply effortlessly, optimizing the burn based on their heating needs. This ensures optimal performance and efficiency, providing consistent heat without excessive wood usage.

Additionally, the Vermont Casting VM508K is designed with ease of maintenance in mind. The ash pan feature allows for straightforward ash removal, making it simple to keep the stove clean and functional. Overall, the VM508K exemplifies the perfect blend of traditional aesthetics, modern technology, and efficient heating, resulting in a high-quality, reliable wood stove that can greatly enhance any living environment.
Top Page Image Contents