Operation
Rotisserie Setup (if equipped) | Figure 12a | Rotisserie Motor Bracket | ||
|
|
| ||
|
|
|
| |
NOTICE |
|
|
| Rotisserie Motor |
|
|
| Bracket for Built- | |
The rotisserie assembly includes a counter- |
|
|
| |
|
|
| In Models | |
|
|
|
| |
weight for large or irregular foods; using the |
|
|
|
|
counterweight reduces strain on the motor |
|
|
|
|
which is rated to turn a maximum of 12 lbs. |
|
|
|
|
1. Attach the Rotisserie Motor Bracket to the |
|
|
|
|
left side of the base by aligning the holes |
|
|
| B231 |
and securing the pieces together using the |
|
|
| |
|
|
| B163 | |
two (2) bolts and two (2) lock nuts pro- |
|
|
| |
|
|
|
| |
vided. (Fig. 12a) |
|
| Figure 12b | Remove Bolts |
NOTE: For grill models with a marinating station: Loosen the |
|
| and Nuts | |
|
|
|
| |
two (2) bolts and nuts securing the heat shield marinating tray |
|
| ||
to the grill body. (Fig. 12b) Attach the rotisserie motor bracket |
|
| ||
using the same mounting holes. Secure both the bracket and |
|
|
| |
heat shield using bolts and nuts provided. |
|
|
|
|
2. Remove the warming rack. Lay a flat noncombustible pan directly |
|
| ||
on the cooking grates to catch drippings. Large food items may |
|
|
| |
require that you remove the middle cooking grate(s), and place the |
| B183 | ||
pan on the sear plates. Never use the main burners while using the |
| |||
|
| |||
rotisserie burner. |
|
|
| View from behind |
3. Insert the ends of the Rotisserie Support into the slots of the right |
| and under the side | ||
| shelf. | |||
cooking grate, so the edge of the support is approximately 1” from | Heat Shield | ||
the right casting, and the top groove is |
|
|
|
in line with the rotisserie spit hole in | Rotisserie | Figure 12c |
|
the left casting. (Fig. 12c) |
|
| |
Forks |
|
| |
4. Engage the Motor Bracket to the |
|
|
|
left side of the base as per Rotisserie |
|
| Bushing |
instructions. |
|
| |
|
| Rotisserie | |
5. Engage the Rotisserie Motor in the | Rotisserie |
| |
| Support | ||
Motor Bracket. (Fig. 12c) | Motor |
| |
|
| ||
6. Assemble the spit and meat forks. |
|
|
|
Adjust the retainer bushing to keep |
|
|
|
the spit in place. (Fig. 12c) |
|
|
|
7. Tighten the thumbscrews with small |
|
|
|
pliers. | Motor |
|
|
8. Insert the Spit Rod into the Rotisserie |
|
| |
Bracket |
|
| |
|
|
| |
Motor. (Fig. 12d) |
|
| B131 |
|
|
| |
Figure 12d | Spit Rod - Motor End |
| |
|
| ||
|
|
| B132 |
| Page 10 |
|
|
50004581