Safety
E. ELECTRICAL SAFETY
WARNING
•Always confirm that this Grill has been grounded in accordance with applicable local Codes or, in the absence of local Codes, with the National Electrical Code, ANSI/NFPA No. 70 or the Canadian Electrical Code, CSA C22.1, when an external electrical source is being utilized for the Rotisserie Motor.
1.Never immerse the power cord or power plug in water, or in any other liquid to protect against electric shock;
2.Always unplug the power cord from the outlet when not in use, and before cleaning the Grill. Always allow the unit to cool before installing or removing any Rotisserie components;
3.Always contact the manufacturer for necessary repair services, if the unit has malfunctioned or has been damaged in any manner, and never attempt to operate the unit with a damaged power cord or power plug;
4.Never allow the power cord to contact a hot surface or to hang over the edge of a table, where it might sustain dam- age;
5.Never use this Grill for any purpose other than the ones specifically intended by the manufacturer;
6.Always connect the power cord to the Grill first, and then plug it into the power outlet;
7.Always connect this Grill to an electrical circuit protected by a Ground Fault Interrupter (GFI);
8.Never remove the
9.If it is necessary to use an extension cord, always select one that has a
10.Keep any electrical supply cord and the fuel supply hose away from any heated surface.
11.Electrical Grounding Instructions: This outdoor cooking gas appliance is equipped with a
F. BATTERY HANDLING
WARNING
Replacing the battery incorrectly might result in an explosion. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to your local environmental guidelines.
Page vi
50004581