Section Two
SIDE BUENER CONTROL PANEL ASSEMBLY
Loosen the three screws and washers from side burner bowl, then attach side burner with control panel and tighten them as in the figure shown below. Finally attach the side burner flex wire to the side burner by using a wrench (included).
SIDE SHELF ASSEMBLY
The screws used to attach the side shelf are already screwed into the left side shelf and side burner
(see the figure below). First remove the screws from the left side shelf and side burner bowl, then attach left side shelf and side burner to firebox or
Attention:
a.4 screws below should be firmed from firebox to left side shelf and side burner.
b.6 screws to attach firebox should be from outside into firebox.
6