Great Outdoors 3600G manual HAROWARE0AG

Assem ly Step 5

3Damper Plates

Phillips Head

Screwdriver

HAROWARE0AG

10-24 Nuts	10-24 Lock Washers	10-24 x 5/8" Bolts	3/8"
			Wrench
3 Required	3 Required	3 Required

1.Set one damper plate on top of the cabinet and line it up with the corresponding "butterfly" holes.

2.Insert a bolt from the top through the center hole.

3.From the bottom side, place a lock washer and nut on the bolt as shown,

4.Thread the nut just tight enough to keep the damper

plate snug. It should be able to rotate with little	Bolt
resistance.

Damper

5.Repeat steps for the 2 remaining side dampers.

Lock Washer

Nut