Assem ly Step
2 Carry | Phillips Head |
Handles | Screwdriver |
HAROWAREOAG
5/16 Lock Washers | Bolts | 1/2" | ||
Wrench | ||||
8 Required | 8 Required | 8 Required |
|
|
1.Line up the carry handle with the corresponding holes on the side of the cabinet as shown. The
handles must be positioned upright with the bolt holes on the bottom as shown.
2.Insert the bolts from the outside and thread the lock washers and nuts from the inside of the cabinet.
3.Firmly tighten the nuts.
4.Complete steps for both sides of the cabinet assembly.
10