HAROWAREOAGScrewdriver

4 Legs

Phillips Head

1/4-20 x 5/8" Bolts

14 Req uired

1.Leave the cabinet upside down.

2.For each leg, line up the mounting holes as shown and insert the bolts. Nuts are

pre-welded to the cabinet.

IMPORTANT: The leg that contains an extra hole on its side must be mounted

at the front in the position shown. This hole will be used to secure the gas hose to the leg with a zip-tie (Step 11).

3.DO NOT insert bolts into the two front

mounting holes indicated as shown. These bolts will be mounted in the next

step of the assembly.

4.DO NOT tighten the bolts for the

front legs. Leave them loose enough so that the legs can move easily. The back legs may be tightened securely at this time.

NOTE. Hardware Bag A includes 16 bolts - you will

need14boltsforthisstep.

The 2 remaining bolts will

_!_!;:_i_;_i!_;_;_;:_;_;:_;_;:_;_;:_;_;:_;_;:_;_;:_;_;:_;_;:¸i!i!!i!!!;!;:¸I;¸!ii!!iiiiiiiiiiiii;: ;;iiiiiii!;!i¸iii!;iiiii!!;:;: !!!;__;::i!

DO NOT install these 2 bolts in this step.

Leg with extra hole

(see detail