Assem ly t | Great Outdoors 3600G specification

Assem ly Step 1t

HARDWARE BAG

S-Hook

Pliers

Using the zip tie, secure the hose to the front leg as shown. Do not pull the zip tie tight - leave it just loose enough so that the hose can be adjusted if needed.

Tying the hose to the leg helps prevent the hose from coming into contact with the hot burner chamber.

Inspect the installation underneath

the smoker to ensure that the hose is

not rubbing any portion of the burner chamber.

Crimp

Place one end of the S-Hook around the regulator neck or through the eyelet as shown.

2_ Using a set of pliers, crimp the S-Hook securely to the HVR so that it can not be removed from the HVR.

3_ When an LP tank is not attached to the smoker, use the S-Hook to hang the HVR from the carry handle on the side of the smoker. This will help prevent dirt and other particles from plugging the end of the HVR.

Assembly is now complete! Please follow all instructions

and safeguards on the following pages for connecting the LP tank.