Char-Broil 463230511 manual Bar Burner, Warming Rack Leg Wire Pivot Wire Cooking Grate AA Battery

•Place heat tents over tube burners by inserting tabs into slots in front of firebox. Opposite ends of heat tents rest on pins in back of

13 firebox.

NOTE: There is no heat tent over bar burner.

of Firebox

Back

Pin

Heat Tent

Bar Burner

of Firebox

Front

Heat Tent

14	•	Place cooking grates onto grate rests.
	•	Insert ends of Warming Rack pivot wire into holes in sides of gril lid. Insert ends of Warming Rack leg wire into holes in sides of
		firebox.

NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top, Warming Rack is installed upside-down.

• Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto ignitor.

Warming Rack

Leg Wire

Pivot Wire

Cooking Grate

-

+

+

–

AA Battery

25