Coleman 9928 manual Installing 1 lb. Disposable Cylinders

13. After cleaning or inspection,	Fig. 15
return the burners down to the
proper position. Check that all
the burner venturi are set over
the valve outlets correctly. The
valve orifices must be inside the
venturi tubes and the venturi
tubes must be inside the burner
tubes (Fig. 15). Reinstall the
burner screws.

Burner Tube

Venturi

Tube

2.Open the grill lid and extend the side tables. Lower the propane bottle support (Fig. 17).

Fig. 17

14.Before lighting the grill, reassemble and make sure all parts are in their proper working position.

Installing 1 lb. Disposable Cylinders

NOTE: Your 9928 Series grill is set up from the

factory to use a 1 lb. disposable propane cylinder.

WARNING

Only cylinders marked “Propane” must be used.

WARNING

This procedure MUST be performed OUTDOORS only! Read and follow the directions on the cylinder.

DANGER

•NEVER store a spare L.P. gas supply cylinder under the grill body or inside the grill enclosure or in the vicinity of any heat producing appliance.

Failure to follow this information exactly could result in an explosion and/or fire causing death or serious injury.

CAUTION

Tighten by hand only. DO NOT use tools.

1. Screw the regulator into the grill hand tight (Fig. 16).

Fig. 16

Propane

Bottle

Support

3.Remove the plastic cap from the propane bottle and screw the propane bottle into the regulator hand tight (Fig. 18).

Fig. 18

4.The cylinder must be arranged for vapor withdrawal. Illustration (Fig. 19) shows the propane bottle properly installed.

Fig. 19

English-7