Electrolux EHG 6402, EHG 6412, EHG 6832 manual Maintenance and Cleaning, Hob Top, Pan Supports

Page 12

12electrolux

Maintenance and Cleaning

Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply.

The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool.

This appliance cannot be cleaned with steam or with a steam cleaning machine.

The Hob Top

Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing up liquid has been added. Avoid the use of the following:

-household detergent and bleaches;

-impregnated pads unsuitable for non-stick saucepans;

-steel wool pads;

-bath/sink stain removers.

Should the hob top become heavily soiled, the following products are recommended:

-For stainless steel hobs use a proprietary stainless steel cleaner.

-For other hobs use Hob Brite or Bar Keepers Friend.

Do not leave acid or alkaline substances (e.g. vinegar, salt, lemon juice, etc.) on the cooktop.

Pan Supports

The enamelled pan supports are dishwasher proof. If washing them by hand, take care when drying them as the enamelling process occasionally leaves rough edges. If necessay, remove stubborn stains using a paste cleaner.

After cleaning, be sure to wipe dry with a soft cloth and make sure that the pan supports are correctly positioned.

Model EHG 6832: The hob has two cast iron pan supports. Take care when removing them. They are heavy and could damage the hob or your kitchen furniture if you let them fall.

Image 12
Contents Instruction booklet Page Welcome to the world of Electrolux Contents Important Safety Information InstallationPeople Safety During UseService Environmental InformationDescription of the Hob Instructions for the User Operation Hob burners control knobsLighting the burners Only for models EHG 641, EHG 6412, EHGElectrolux Using the hob correctly Burner Minimum Maximum DiameterMaintenance and Cleaning Hob TopPan Supports Burners Ignition electrodeSymptom Something Not Working?Instructions for the Installer Engineer technical dataType of GAS Important safety requirements Provision for VentilationInstallation Gas Connection Location Fitting the Hob into the Worktop SealBuilding Building over a cupboard or drawerBuilding over a kitchen unit with door Electrical Connections This HOB Must be EarthedPermanent Connection Wiring diagram Fault Finding Preliminary Electrical Systems CheckEarth Continuity Check Ignition System / Gas Ignition Pressure Testing ProcedureMinimum adjustment CommissioningConversion from Natural Gas to LPG MethodStandard Guarantee Conditions ExclusionsService and Spare Parts 0870 5 929European Guarantee Electrolux Page 35693-1702 10/07 R.A