Electrolux EHG 6832, EHG 6402, EHG 6412 manual Installation

Page 18

18electrolux

Installation

IMPORTANT

This hob must be installed by a competent person to the relevant Gas Standards.

Any gas installation must be carried out by a registered competent person.

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.

The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this instruction booklet be ignored.

On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment is fixed so that the washer is fitted between the components as shown in the diagram. Screw the parts together without using excessive force.

A)End of shaft with nut

B)Washer

C)Elbow

Image 18
Contents Instruction booklet Page Welcome to the world of Electrolux Contents People Safety Important Safety InformationInstallation During UseService Environmental InformationDescription of the Hob Instructions for the User Lighting the burners OperationHob burners control knobs Only for models EHG 641, EHG 6412, EHGElectrolux Using the hob correctly Burner Minimum Maximum DiameterMaintenance and Cleaning Hob TopPan Supports Burners Ignition electrodeSymptom Something Not Working?Instructions for the Installer Engineer technical dataType of GAS Important safety requirements Provision for VentilationInstallation Gas Connection Location Fitting the Hob into the Worktop SealBuilding Building over a cupboard or drawerBuilding over a kitchen unit with door Electrical Connections This HOB Must be EarthedPermanent Connection Wiring diagram Fault Finding Preliminary Electrical Systems CheckEarth Continuity Check Ignition System / Gas Ignition Minimum adjustment Pressure TestingProcedure CommissioningConversion from Natural Gas to LPG MethodStandard Guarantee Conditions ExclusionsService and Spare Parts 0870 5 929European Guarantee Electrolux Page 35693-1702 10/07 R.A