GAS Instructions

SAFE HANDLING TIPS FOR LIQUID PROPANE GAS CYLINDERS

• Liquid Propane (LP) gas is a petroleum product as are gasoline and natural gas. LP gas is a gas at regular temperatures and pressures.. Under moderate pressure, inside a cylinder, LP gas is a liquid.. As the pressure is released, the liquid readily vaporizes and becomes gas..

• LP gas has an odor similar to natural gas. You should be aware of this odor.

•LP gas is heavier than air. Leaking LP gas may collect in low areas and prevent dispersion..

•To fill, take the LP cylinder to a gas propane dealer, or look up “gas-propane” in the phone book for other sources of LP gas..

mWARNING: We recommend that your LP cylinder be filled at an authorized LP gas dealer, by a qualified attendant, who fills the tank by weight. IMPROPER FILLING IS DANGEROUS.

•Air must be removed from a new LP cylinder before the initial filling. Your LP dealer is equipped to do this..

•The LP cylinder must be installed, transported, and stored in an upright position. LP cylinders should not be dropped or handled roughly..

•Never store or transport the LP cylinder where temperatures can reach 125° F (too hot to hold by hand — for example: do not leave the LP cylinder in a car on a hot day)..

Note: A refill will last about 18-20 hours of cooking time at normal use.The fuel scale, a feature on some of our grills, will indicate the propane supply so you can refill before running out.You do not have to run out before you refill.

•Treat “empty” LP cylinders with the same care as when full. Even when the LP tank is empty of liquid there still may be gas pressure in the cylinder.. Always close the cylinder valve before disconnecting..

mCAUTION: Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

•Do not use a damaged LP cylinder. Dented or rusty LP cylinders or LP cylinders with a damaged valve may be hazardous and should be replaced with a new one immediately..

•The joint where the hose connects to the LP cylinder must be leak tested each time the LP cylinder is reconnected.. For example, test each time the LP cylinder is refilled..

•Be sure the regulator is mounted with the small vent hole pointed downward so that it will not collect water.. This vent should be free of dirt, grease, bugs etc..

•The gas connections supplied with your Weber® gas appliance have been designed and tested to meet 100% CSA and ANSI requirements..

mWARNING: Replacement LP tanks must match the regulator connection supplied with this Weber® gas appliance.

Liquid Propane Cylinder Requirements

• Check to be sure cylinders have a D.O.T. certification (1), and date tested (2) is within five years of use.. Your LP gas supplier can do this for you..

•All LP tank supply systems must include a collar to protect the cylinder valve.

•The LP cylinder must be a 20-lb. size approximately 18¼ inches high, 12¼ inches in diameter..

•The cylinder must be constructed and marked in accordance with the Specifications for LP - Gas Cylinders of the U..S.. Department of Transportation (D..O..T..) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes or Transportation of Dangerous Goods; and Commission, as applicable..

Canadian Liquid Propane Cylinder Requirements

Note: Your retailer can help you match a replacement tank to your barbecue.

•The LP cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders, T..C.. ◆

89962 specifications

The Weber 89962 is a high-performance gas grill designed to deliver exceptional cooking results while ensuring durability and ease of use. With a focus on innovative features and advanced technologies, the Weber 89962 has become a favorite among grilling enthusiasts and outdoor cooking aficionados.

One of the standout features of the Weber 89962 is its powerful cooking system, which incorporates a total of four stainless steel burners. This allows for precise temperature control across the grilling surface, ensuring that meats are cooked evenly and to perfection. The burners are designed to provide a total output of 48,000 BTUs, making it suitable for both low and slow cooking as well as high-heat searing.

The grill also boasts an expansive cooking area, with a primary grilling space of 669 square inches and an additional warming rack that adds 198 square inches. This combination allows the user to grill multiple items simultaneously, making it ideal for family gatherings or entertaining guests. The porcelain-enameled cast iron cooking grates contribute to superior heat retention and create attractive grill marks on food.

For those who value convenience, the Weber 89962 is equipped with a built-in ignition system that ensures quick and reliable startup. The grill features a stainless steel heat diffuser that helps distribute heat evenly across the cooking surface while protecting the burners from drippings. This not only enhances flavor through reduced flare-ups but also simplifies cleanup.

Another important characteristic of the Weber 89962 is its durable construction. The grill is crafted from weather-resistant materials, ensuring it can withstand the elements and provide years of reliable service. The cart design includes enclosed storage for propane tanks and grilling accessories, keeping everything organized and easily accessible.

The grill's side tables provide additional workspace and can accommodate condiments, plates, and tools during grilling sessions. Integrated hooks allow for easy hanging of utensils, streamlining the cooking process.

Overall, the Weber 89962 combines high performance, convenience, and durability, making it an excellent choice for anyone serious about outdoor grilling. Its combination of advanced engineering and thoughtful design ensures that grilling remains a delightful experience, whether for casual weeknight meals or grand summer barbecues.