Trane PKGP-PRC001-EN manual Rigorous Testing

Page 7

Features and Benefits

Reference or Comparative Enthalpy Measures and communicates humidity while maximizing comfort control.

Sloped Drain Pans

Standard on every unit.

Standardized Components Components are placed in the same location on allVoyager units. Familiarize yourself with oneVoyager and you are familiar with every Voyager.

Due to standardized components throughout theVoyager line, contractors/ owners can stock fewer parts.

Supply and/or Return Air Smoke Detector

With this option installed, if smoke is detected, all unit operation will be shut down. Reset will be manual at the unit. Return Air Smoke Detectors require minimum allowable airflow when used with certain models.

Tool-less Hail Guards Tool-less, hail protection quality coil guards shall be either

factory or field-installed for condenser coil protection.This option protects the condenser coil from vandalism and/or hail damage.

VariTrac

WhenTrane’s changeover VAV System for light commercial applications is coupled withVoyager, it provides the latest in technological advances for comfort management systems and can allow thermostat control in every zone served by VariTrac.

Ventilation Override Accessory

With the Ventilation Override Accessory installed, the unit can be set to transition to up to 3 different pre-programmed sequences for Smoke Purge, Pressurization, and Exhaust.The transition occurs when a binary input on the RTOM is closed (shorted).This would typically be a hard wired relay output from a smoke detector or fire control panel.The ventilation override kit is available as a field installed accessory.

Zone Sensors

Available in programmable, automatic and manual styles.

Rigorous Testing

The fan and idler arm assembly designs have been tested to over 300,000 cycles each. Our combined cycle testing is now over 7,000,000 cycles.

All of Voyager’s designs were rigorously rain tested at the factory to ensure water integrity.

Actual shipping tests were performed to determine packaging requirements. Units were test shipped around the country to determine the best packaging. Factory shake and drop tests were used as part of the package design process to help assure that the unit arrives at the job site in top condition.

Rigging tests include lifting a unit into the air and letting it drop one foot, assuring that the lifting lugs and rails hold up under stress.

We perform a 100% coil leak test at the factory.The evaporator and condenser coils are leak tested at 200 psig and pressure tested to 450 psig.

All parts are inspected at the point of final assembly. Sub-standard parts are identified and rejected immediately.

Every unit receives a 100% unit run test before leaving the production line to make sure it lives up to rigorousTrane requirements.

Voyager units incorporate either a one piece top or theTrane-Tite-Top (T3). Each part of the top (either two or three pieces) overlaps in such a way that water cannot leak into the unit.These overlapped edges are gasketed and sealed to ensure superior water integrity.

VariTrac™

Trane Communication Interface (TCI) Available factory or field installed.This module when applied with the ReliaTel™ easily interfaces withTrane’s Integrated ComfortTM System.

PKGP-PRC001-EN

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Packaged Heat Pumps Introduction Packaged Rooftop Air ConditionersContents Factory Installed Options Field Installed Options Features BenefitsFactory or Field Installed Options Easy to Install, Service and Maintain Features and BenefitsQuality and Reliability Quick-Access Panels Clogged Filter/Fan Failure SwitchColoredAnd NumberedWiring Power Exhaust OptionRigorous Testing Added Efficiency Easy to Install and ServiceClearance Requirements Power Exhaust AccessoryBarometric Relief Condensate TrapTo Find Capacity at Intermediate Conditions Cooling CapacityHeating Capacity StepModel Number Description Digits 9, 10 Factory Installed OptionsCapacity MBh EER2 GeneralData12½Ton Table GD-1 General DataTable GD-2 General Data General DataMBH SHC MBH SHC MBH SHC PerformanceWC*180B Data15TonMBH SHC Data20Ton Three Phase WCD240BBHP Table PD-6 Evaporator Fan Performance 12½ Ton WC*150BBHP RPM Table PD-8 Evaporator Fan Performance 15 Ton WCH180B Table PD-7 Evaporator Fan Performance 15 Ton WCD180BCFM RPM BHP RPM BHP Table PD-9 Evaporator Fan Performance 20 Ton WC*240BTable PD-10 Standard Motor & Drive/Fan Speed RPM Data12½ 20TonsTable PD-12 Oversized Motor & Drive/Fan Speed RPM WCH240B WCD240BData12½Ton Data15Ton Data20Ton Table PD-20 Auxiliary Electric Heat Capacity Table PD-19- Heating Capacity Correction FactorsControls Field Installed Control OptionsElectrical Data Table ED-1 Unit WiringRPM FLA LRA 208/230 Volts Three Phase Volts Three Phase AYHHTRNW18A AYDHTRKW18AWCD150BW AYDHTRKW36A AYDHTRKW54AFLA LRA RPM RLA LRA Disconnect Switch Byothers Zonesensors Rooftop Unit Zone Sensors -Typical Number Of WiresJobsite Connections Typical Wiring 12½ 20TonsWiring 12½ 20Tons Wiring 12½ 20Tons Wiring 12½ 20Tons 12½, 15Ton Dimensional DataDownflow Unit Clearance Horizontal Unit Supply/Return and Unit Clearance Downflow Duct Connections Field FabricatedDimensional 19 5/16 73 7/16 26 5/16 Table DD-1 Dimensional 12½ 20Tons DataAccessoriesTable DD-2 Options FiopsOptions Fiops Table DD-3 12½-20 Tons Table W-1 Accessory Net Weights Lbs Weights 12½ 20TonsTable W-1 Weights 12½ 20Tons Mechanical Specifications High Pressure Cutout Factory Installed OptionsTwo-Inch Pleated Filters Reference or Comparative Enthalpy Factory or Field Installed OptionsEconomizer Downflow FrostatRoof Curb Downflow Field Installed OptionsPowered Exhaust Manual Outside Air DamperTrane

PKGP-PRC001-EN specifications

The Trane PKGP-PRC001-EN is a highly efficient and versatile rooftop packaged unit designed for commercial HVAC applications. This advanced system showcases Trane's commitment to quality, reliability, and energy efficiency while catering to a diverse range of climate control needs. Its innovative technologies and features make it a top choice for building owners and facility managers looking to enhance indoor comfort while minimizing energy costs.

One of the standout characteristics of the PKGP-PRC001-EN is its impressive cooling and heating capacities, which ensure optimal performance in various conditions. This unit is equipped with advanced scroll compressors that provide efficient cooling and heating, enabling it to maintain a comfortable environment even during extreme temperature fluctuations. The unit also features a multi-position design, allowing for easy installation and adaptation to different rooftop configurations.

In terms of energy efficiency, the PKGP-PRC001-EN excels with its high Seasonal Energy Efficiency Ratio (SEER) and Energy Efficiency Ratio (EER) ratings. These ratings signify its ability to deliver exceptional cooling performance while consuming less energy, ultimately lowering operational costs for facility owners. Additionally, the unit complies with the latest energy standards, including ASHRAE 90.1 and DOE regulations, further emphasizing its commitment to sustainability.

Another notable feature is its advanced control system. The PKGP-PRC001-EN comes equipped with Trane's proprietary Tracer™ controls that provide precise temperature and humidity management. These controls are user-friendly, allowing for easy programming and monitoring of the system's performance. Furthermore, the unit can be integrated with building management systems (BMS), offering greater control and efficiency.

The design of the PKGP-PRC001-EN also emphasizes durability and ease of maintenance. Constructed with high-quality materials, this unit withstands harsh environmental conditions while minimizing wear and tear over time. Access panels and a structured layout allow for straightforward maintenance, ensuring that service and repairs can be conducted quickly and efficiently.

In summary, the Trane PKGP-PRC001-EN is more than just an HVAC unit; it is a comprehensive solution for efficient heating and cooling in commercial settings. With its cutting-edge technologies, energy-efficient performance, and user-friendly control capabilities, this rooftop packaged unit is an excellent choice for those looking to optimize their HVAC operations while embracing sustainability and reliability.
Top Page Image Contents