Agilent Technologies 54600-Series manual Storage, General Characteristics

Page 19

Performance Characteristics (continued)

Storage

Save/Recall (non-volatile)	54621A/D, 54622A/D, 54624A: 3 setups and traces can be saved and recalled internally
	54641A/D, 54642A/D: 4 setups and traces can be saved and recalled internally

Floppy Disk	3.5” 1.44 MB double density
	Image formats : TIF, BMP
	Data formats: X and Y (time/voltage) values in CSV format
	Trace/setup formats: Recalled

I/O

RS-232 (Serial) Standard Port	1 port: XON or DTR; 8 data bits; 1 stop bit; parity = none; 9600, 19200, 38400, 57600 baud rates (use Agilent 34398A cable)

Parallel Standard Port	Printer support

Printer Compatibility	HP DeskJet, LaserJet with HP PCL 3 or greater compatibility:
	Black and white @150x150 dpi; Gray scale @ 600x600 dpi
	Epson: black and white @180x180 dpi
	Seiko thermal DPU-414: black and white

Optional GPIB Interface	Fully programmable with IEEE488.2 compliance
Module (N2757A)	Typical GPIB throughput of 20 measurements or twenty 2000-point records per second

Optional Printer Kit	The N2727A is a thermal printer kit, includingprinter power, parallel cable, power cable and paper

General Characteristics

Physical	Size: 32.26 cm wide x 17.27 cm high x 31.75 cm deep (without handle)
	Weight: 6.35 kgs (14 lbs) on 54621A/D, 54622A/D, 54624A; 6.82 kgs (15 lbs) on 54641A/D, 54642A/D

Probe Comp Output	54621A/D, 54642A/D, 54624A: Frequency ~1.2 kHz; Amplitude ~5 V
	54641A/D, 54642A/D: Frequency ~2 kHz; Amplitude ~5 V

Trigger Out	54621A/D, 54622A/D, 54624A: 0 to 5 V with 50 Ω source impedance; delay ~ 55 ns
	54641A/D, 54642A/D: 0 to 5 V with 50 Ω source impedance; delay ~ 22 ns

Printer Power	7.2 to 9.2 V, 1 A

Kensington lock	Connection on rear panel for security

* Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.

19

Image 19

Contents 60 to 500 MHz, up to 2 GSa/s Ideal for mixed analog and digital analysisMB to 8 MB MegaZoom deep memory standard Maximum Sample Rate Maximum Memory Channels Selection GuideSelection Guide ModelChannel scope model 54624A MegaZoom deep memory Affordable and ResponsiveBuilt-in help at your fingertips Standard featuresConnectivity made easier Built-in floppy driveDeep memory transfer over the bus Other standard featuresN2758A can Trigger Module Flexible Triggering TriggeringCAN, LIN, and USB Triggering Microcontroller DSP Applications I2C and SPI TriggeringCapture all of your data at once Standard Serial Triggering Agilent Passive Probes Selection Guide ProbesAcquisition Analog Channels Performance CharacteristicsVertical System Analog Channels 54641A/D, 54642A/DDC to max bandwidth 40 dB Same Channel Example 54641A/D, 54642A/D HorizontalPulse Width Trigger SystemExternal EXT Triggering I2CDisplay System Measurement FeaturesStorage General CharacteristicsOther Power RequirementsOrdering Information Passive Probes Description Warranty and Calibration OptionsAccessories Description Available Options DescriptionActive probes Description Logic Probes DescriptionCables Description 5968-8152EN