Agilent Technologies 54600-Series manual N2758A can Trigger Module

Page 7

N2758A CAN Trigger Module

Trigger on CAN 2.0A/B message frames with user specified IDs and/or data

Trigger on Error frames

Differential CAN

Acknowledge On/Off

Built In QuickHelp

Remote Control via GPIB/RS232

Compatible with 54621D, 54622D, 54641D, 54642D

The N2758A CAN trigger module extends your Mixed Signal Oscilloscope’s (MSO) capabilities beyond the standard CAN SOF trigger. The module enables the MSO to isolate and trigger on a particular frame’s content. This triggering allows you to:

sort through frame traffic on the bus

isolate frames of interest

specify particular frame characteristics

trigger and measure latency between CAN frames meeting the user specification

The CAN trigger module is ideal for analyzing all traffic on the broadcast network. Quickly find frames that meet the specifica- tions you select with an isolating capability similar to pattern triggering across multiple channels in the parallel domain. Synchronize to the particular frame then examine the system behavior of interest.

For more comprehensive information, please see the Agilent 54600-Series Oscilloscopes Probes and Accessories data sheet (Agilent publication number 5968-8153). You can get a copy by calling

1-800-452-4844 or by visiting our website at: www.agilent.com/find/mso

The N2758A kit includes the CAN trigger module, digital cable, ten grabbers, and two probe ground leads.

The N2758A CAN trigger module reduces the time required to debug your mixed signal CAN based designs.

7

Image 7
Contents 60 to 500 MHz, up to 2 GSa/s Ideal for mixed analog and digital analysisMB to 8 MB MegaZoom deep memory standard Maximum Sample Rate Maximum Memory Channels Selection GuideSelection Guide ModelChannel scope model 54624A MegaZoom deep memory Affordable and ResponsiveBuilt-in help at your fingertips Standard featuresConnectivity made easier Built-in floppy driveDeep memory transfer over the bus Other standard featuresN2758A can Trigger Module Flexible Triggering TriggeringCAN, LIN, and USB Triggering Microcontroller DSP Applications I2C and SPI TriggeringCapture all of your data at once Standard Serial Triggering Agilent Passive Probes Selection Guide ProbesAcquisition Analog Channels Performance CharacteristicsVertical System Analog Channels 54641A/D, 54642A/DDC to max bandwidth 40 dB Same Channel Example 54641A/D, 54642A/D HorizontalPulse Width Trigger SystemExternal EXT Triggering I2CDisplay System Measurement FeaturesStorage General CharacteristicsOther Power RequirementsOrdering Information Passive Probes Description Warranty and Calibration OptionsAccessories Description Available Options DescriptionActive probes Description Logic Probes DescriptionCables Description 5968-8152EN