Agilent Technologies 54600-Series manual Power Requirements, Other

Performance Characteristics (continued)

Power Requirements

Line Voltage Range	54621A/D, 54622A/D, 54624A: 100 - 240 VAC ±10%, CAT II, automatic selection
	54641A/D, 54642A/D: 100-240 VAC, 50/60 Hz, CAT II, automatic selection; 100-132 VAC, 440 Hz, CAT II,
	automatic selection
Line Frequency	54621A/D, 54622A/D, 54624A: 47 to 440 Hz
	54641A/D, 54642A/D: 50/60 Hz, 100-240 VAC; 440 Hz, 100-132 VAC
Power Usage	54621A/D, 54622A/D, 54624A: 100 W max
	54641A/D, 54642A/D: 110 W max
Environmental Characteristics
Ambient Temperature	Operating -10 °C to +55 °C; Non-operating -51 °C to +71 °C
Humidity	Operating 95% RH at 40 °C for 24 hr; Non-operating 90% RH at 65 °C for 24 hr
Altitude	Operating to 4,570 m (15,000 ft); Non-operating to 15,244 m (50,000 ft)
Vibration	HP/Agilent class B1 and MIL-PRF-28800F; Class 3 random
Shock	HP/Agilent class B1 and MIL-PRF-28800F; (operating 30 g, 1/2 sine, 11-ms duration, 3 shocks/axis along major axis.
	Total of 18 shocks)
Pollution Degree2	Normally only dry non-conductive pollution occurs.
	Occasionally a temporary conductivity caused by condensation must be expected.
Indoor Use Only	This instrument is rated for indoor use only
Other
Installation Categories	CAT I:Mains isolated
	CAT II:Line voltage in appliance and to wall outlet
Regulatory Information:	Safety
	IEC 61010-1:1990+A1:1992+A2:1995 / EN 61010-1:1994+A2:1995
	UL 3111
	CSA-C22.2 No. 1010.1:1992
Supplementary Information	The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive
	89/336/EEC, and carries the CE-marking accordingly. The product was tested in a typical configuration with
	HP/Agilent test systems.

* Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.

20