HoMedics BPA-100 manual Installing Batteries, Using AN AC Adapter not Included

Page 7

BPA-100IB_ENGSP.qxd 10/24/05 10:51 AM Page 11

INSTALLING BATTERIES

1.Press down on latch and lift the battery cover towards you to open the battery compartment.

2.Install or replace 4 “AA” sized batteries in the battery compartment according to the indications inside the compartment.

3.Replace the battery cover by clicking in the bottom hooks first, then push in the top end of the battery door.

Replace the batteries if:

1.The weak battery symbol appears on the display.

2.Nothing appears on the display when the power is switched on.

As the supplied batteries are for test only, they may be discharged earlier than batteries you buy in stores. Replace the batteries in pairs. Remove batteries when unit is not in use for extended periods of time.

Note: Batteries are hazardous waste. Do not dispose of them together with the household garbage.

USING AN AC ADAPTER (NOT INCLUDED)

This monitor is designed for operation with batteries or an optional AC adapter. Please use only a compatible, UL approved AC adapter with required voltage and current as indicated in this manual. Contact HoMedics Consumer Relations at 1-800-466-3342 to purchase a compatible AC adapter.

Note: • Please unload the batteries when operating with an AC adapter for an extended period of time. Leaving the batteries in the compartment for a long time may cause leakage, which may lead to damage of the unit.

•No batteries are needed when operating with an AC adapter.

Connect the AC adapter with the AC adapter jack in the back of the unit as shown below.

AC Adapter

Input: 120V 60Hz 15W

Output: 12V DC 600mA

Connect AC adapter here

11

12

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Automatic Blood Pressure Monitor Table of Contents Important Product Notices and Safety Instructions About Blood Pressure NAME/FUNCTION of Each Part Monitor WorksDisplay Explanations Display SymbolsUsing AN AC Adapter not Included Installing BatteriesApplying the Cuff Date & Time SET ProcedurePull end toward you, then wrap over cuff Important Notes Measurement ProcedurePress the User Select Button to choose User 1 or User Recalling Values from Memory WHO Health IndicatorImportant Notes Regarding Your Blood Pressure Measurement Clearing Values from MemoryCARE, Maintenance & Cleaning Potential for RADIO/TELEVISION Interference TroubleshootingDimensions SpecificationsMonitor automático de presión sanguínea Información DE USO Información InicialAvisos Importantes DEL Producto E Instrucciones DE Seguridad Sobre LA Presión Sanguínea NOMBRE/FUNCIÓN DE Cada Pieza Símbolos de la pantalla Explicaciones DE LA PantallaUSO DE UN Adaptador DE CA no Incluido Instalación DE LAS PilasAplicación DEL Brazalete Procedimiento DE Configuración DE Fecha Y HoraMain Arteria Artery principal Notas importantes Procedimiento DE MediciónAutomáticamente en la memoria Indicador DE Salud DE LA OMS Cómo Borrar LOS Valores DE LA Memoria CUIDADO, Mantenimiento Y Limpieza Potencial DE Interferencia CON RADIO/TELEVISIÓN Diagnóstico Y Resolución DE ProblemasDesinflado Especificaciones
Top Page Image Contents