Graco 3A1696C important safety instructions Installation

Installation

1.Install fittings (115, 116, 127) from old pump onto new pump. Torque fittings (116, 127) to 600 +/1 10 in-lb (67.8 N•m). Torque fitting (115) to 450 in-lb (50.8 N•m)

116

95

127

115ti16827a

NOTE: Fill pump casing with hydraulic oil before installing fitting (115).

2.Install new pump (95) to frame.

3.Install bolts (12) and nuts (13). Torque to 225 +/- 10 in-lb (25.42 N•m).

Hydraulic Pump Replacement

4.Replace large pulley (96) on hydraulic pump shaft.

97

96

ti16831a

5.Align pulley (96) on shaft.

6.Replace set-screw (97). Tighten and torque to 60 +/- 2 in-lb (6.8 +/- 0.2 N•m).

7.Install compressor belt (102) first, then install hydraulic pump belt (103)hydraulic pump belt (103)(see Compressor Belt and Hydraulic Pump Belt Installation, page 9).

8.Install hydraulic fluid lines to the hydraulic pump and tighten fittings.

9.Refill Hydraulic Supply System, see page 8.

3A1696C 13