Graco 3A1696C important safety instructions Engine Installation, Pulley Installation

Pulley Installation

1.Position new pulley on engine.

2.Install bolt (19), washer (4), and lock washer (20) in center of pulley. Torque to 125 +/- 10 in-lb (14.1 +/- 1.1 N•m).

3.Tighten set screw (21). Torque to 60 +/- 2 in-lb (25.4 N•m).

Engine Installation

1.Use a lift ring to turn the engine and insert it into the frame.

2.Connect ground wire and hand-tighten four bolts (3) into engine.

Engine Replacement

5. Connect positive red wire (90) to engine.

ti17380a

90

6.Connect yellow and white electrical wires behind muffler.

3

ti17384a

3.Replace belts, see Compressor Belt and Hydrau- lic Pump Belt Replacement, page 9.

4.Connect evaporation line (261) and connect gas line (260).

260

ti17381a

7.Connect positive terminal of battery, then connect ground terminal.

ti17379a

3A1696C 17