Graco 3A1696C important safety instructions Install air line 145 to compressor

Installation

1.Apply high temperature thread sealant to threads of relief valve and screw in relief valve to new air com- pressor.

ti17378a

2.Hand-tighten four bolts (12) and nuts (5) to hold compressor (100) and belt guard (101) to frame.

Compressor Replacement

5.Tighten four nuts (5) and bolts (12) to secure com- pressor.

6.Install top belt guard (108) by tightening four screws

(1) and two nuts (15).

12

108

ti16829a

7. Install air line (145) to compressor.

145

ti17370a ti17366a

3.Loop compressor belt (102) onto idler pulley, engine pulley, and compressor pulley. NOTE: Make sure belt is in the proper track.

4.Tighten four nuts (5) and bolts (12) so that compres- sor is fairly level. Before completely tightening the bolts, tension compressor belt (102) by shifting compressor to the right.

ti17486a

3A1696C 15