Compressor Belt and Hydraulic Pump Belt
7.Remove eight screws from side guard (105) and remove guard.
105
ti17368a
8. Remove two screws from engine muffler bracket.
ti17361a
9.Loosen four nuts (5) and bolts (3) which secure engine to relieve tension on hydraulic pump belt.
3
5
ti17365a
10.Tilt engine back and remove hydraulic pump belt (103). Loop belt around the cooling fan.
11.If installing a new compressor belt, remove com- pressor belt (102).
Belt Installation
1.Install new compressor belt (102) if necessary.
102
ti17362a
2. Install hydraulic pump belt (103).
103 
ti17363a
3.Make sure compressor belt (102) is looped around the engine groove, idler pulley and compressor pul- ley.
102
ti17362a
10 | 3A1696C |