Junction Box Circuit Board Replacement
Junction Box Circuit Board Replacement
Removal
1.Disconnect ground terminal of battery and then dis- connect positive terminal of battery.
2.Remove red and black wires from battery area.
3.Unplug control cable and gun arm cable from junc- tion box (179).
179
ti17387a
4. Disconnect pump counter wires.
ti17385a
5.Disconnect white and yellow wires behind engine muffler.
ti17381a
6.Remove four screws (38) and two screws (37) from junction box (179).
179
37
ti17386a
7. Remove circuit board (178) from junction box (179).
Installation
1.Insert circuit board (178) into junction box (179).
2.Replace four screws (38) and two screws (37) to secure circuit board to junction box (179).
179
37
ti17386a
3.Reconnect pump counter wires and engine wires.
4.Plug in control cable and gun arm cable.
179
ti17388a
NOTE: Make sure control cable and gun arm cable have proper strain relief to prevent damage to con- nections.
5.When all maintenance is finished, reattach battery connections.
ti17485a
18 | 3A1696C |