Invacare 1171794-B user manual Using the Joystick to Drive the Chair, Charger/Programming Input

Page 26

Pronto®Air Personal Transporter w/ MyBody™ Seating

Adjust Speed in 20% Increments (5 Speed Mode) - Press the tortoise button () or hare button () to decrease/increase the speed in 20% increments. The larger bars in the speedometer will light.

Adjust Speed in Smaller Increments (VSP Mode) - Perform the following steps:

a.Press and hold both the tortoise button () and hare button () until the joystick beeps.

b.Perform one of the following:

Press the tortoise button () or hare button () to decrease/increase the speed in 20% increments. The larger bars in the speedometer will light.

Press and hold the tortoise button () or hare button () to decrease/increase the speed in smaller increments. The smaller bars in the speedometer will light.

Joystick

The joystick D has proportional drive control, meaning that further the joystick is pushed from the upright (neutral) position, the faster the personal transporter moves. Your top speed, however, is limited by the programmed settings.

To slow the personal transporter to a stop, simply release the joystick. The personal transporter has automatic speed and direction compensation to minimize corrections.

Charger/Programming Input

The charger/programming input E is located at the front of the joystick housing. This provides easy access for charging the personal transporter batteries. This port also serves as the Remote

Programmer Communication connection. Driving is prevented while the system is charging.

Service Indicator

The AMBER service indicator F will light when an error or fault occurs. Refer to Diagnostic Codes in Electronics manual 1110532 for a listing of the flash codes and what they indicate.

Information Gauge Display

The Information Gauge Display G is located on the front of the joystick housing, it provides the following information to the user on the status of the personal transporter

1.Power is on.

2.True state-of-battery-charge, including notification of when the battery requires charging:

a.Green LEDs are lit, indicating well charged batteries.

b.Amber LEDs are lit, indicating batteries are moderately charged. Recharge batteries before taking a long trip.

c.Red LEDs are lit, indicating batteries are running out of charge. Recharge batteries as soon as possible.

The Information Gauge display also serves as a system diagnostic device when a fault is detected by the control module. A specific number of flashes of the LEDs indicate the type of fault detected. Refer to 7.2 Electrical, page 48

5.3 Using the Joystick to Drive the Chair

The joystick is located on the joystick housing and provides smooth control of speed and direction. It is equipped with 360 degrees of mobility for ease of operation. The joystick is spring-loaded, and automatically returns to the upright (neutral) position when released. Pushing the joystick in a given direction causes the

26

1171794-B

Image 26
Contents Invacare ProntoAir Personal Transporter w/ MyBody Seating InvacareCorporation Contents Troubleshooting General Guidelines SymbolsGeneral Setup Operation InformationStairways and Escalators Global Limited Warranty Excluding Canada Repair or Service Information1171794-B Canada Limited Warranty 1171794-B Safety Handling Safety/HandlingStability and Balance Coping with Everyday Obstacles Pinch Points Footplate Reaching, Leaning and Bending ForwardReaching, Bending Backward Transferring To and From Other SeatsStorage Electrical Charging Batteries Electrical Grounding InstructionsElectrical Batteries Electromagnetic Interference EMI From Radio Wave Sources Weight TrainingWeight Limitation Personal Transporter Electromagnetic Interference EMI Personal Transporter Electromagnetic Interference EMI Label Locations Pronto Air Personal TransporterTechnical Data Typical Product ParametersPersonal Transporter Usage SPJ+ Joystick Switches and IndicatorsWheelchair Operation Joystick Using the Joystick to Drive the ChairService Indicator Charger/Programming InputDisengaging/Engaging Motor Lock Levers Movement ActionProntoAir Personal Transporter w/ MyBody Seating Installing Removing/Installing the Seat AssemblyUsing the Folding Back Assembly RemovingTransporting the Personal Transporter Charging BatteriesDescription and Use of Battery Chargers Tool QuantityPreparing the Personal Transporter for Use Setup and MaintenanceSetup/Delivery Inspection Inspect/Adjust Weekly User/Attendant Inspection ChecklistsService Inspection Inspect/Adjust MonthlyInstalling the Joystick JoystickDisconnecting/Connecting the Joysticks Adjusting the Joystick Depth DisconnectingConnecting Adjusting the Seat Assembly HeightSeat Pan Depth Back Angle AdjustmentAdjusting the Headrest Height Armrest Assemblies Adjusting Arm WidthAdjusting the Arm Height Adjusting the Arm Pad Depth Adjusting the Armrest Pad Angle Left or RightAdjusting the Armpad Angle Up or Down FootboardAdjusting the Footboard Height Adjusting the Footboard AngleRemoving/Installing the Back Cushion Cover Adjusting ForksRemoving/Installing the Seat Cushion Cover Cleaning the Cushion CoversUsing the Proper Batteries BatteriesReplacing the Batteries Disconnecting/Connecting the Battery Cables Working with batteriesCleaning Battery Terminals Resetting the Circuit BreakerTroubleshooting Driving PerformanceInformation Gauge Diagnostics ElectricalChecking Battery Charge Level DON’TUsability Survey YESPage Making Life’s Experiences Possible

1171794-B specifications

The Invacare 1171794-B is a versatile mobility aid designed to enhance the independence and comfort of users needing assistance with mobility. This product is particularly well-suited for individuals with varying levels of mobility challenges, ensuring safety and ease of use in a range of environments.

One of the main features of the Invacare 1171794-B is its lightweight aluminum frame. This construction not only makes the product easy to maneuver, but also adds to its durability. The frame is designed to withstand regular use, ensuring a long lifespan even under demanding conditions.

Another significant characteristic of the Invacare 1171794-B is its adjustable height feature, which allows users to customize the chair according to their personal comfort needs. This adjustability is essential for maintaining ergonomic support and reducing the risk of strain during use. The chair accommodates various user heights, making it a suitable option for a wide audience.

The Invacare 1171794-B is equipped with comfortable, padded armrests and a supportive seat, designed for prolonged use without discomfort. The upholstery is easy to clean, providing convenience for daily maintenance. Additionally, the chair features a safety brake system that ensures stability when the user is getting in or out of the chair, thus prioritizing safety.

Furthermore, the Invacare 1171794-B is designed with easy maneuverability in mind. Its compact design allows it to navigate through tight spaces effortlessly, whether that's within a home or in larger public locales. The smooth-rolling wheels come with a locking mechanism, ensuring that the chair remains stable in stationary positions.

The product also includes a foldable design, making transportation and storage straightforward. This folding capability is beneficial for users who need to travel frequently or have limited storage space at home.

In summary, the Invacare 1171794-B provides an ideal combination of comfort, safety, and convenience, making it an excellent choice for those seeking reliable mobility support. Its innovative features and thoughtful design position it as a valuable asset for enhancing the quality of life for users and caregivers alike.