Operation

Avenger Owner’s Manual

Revised 06/04/08

When the power to your Avenger™ is turned on the TruCharge volt meter/ diagnostics gauge will illuminate. This gauge is used for battery condition and diagnosing operational problems that may arise. See “Diagnostics” section.

Horn Button

Press this button to sound the horn.

Thumb Lever Control

This self-centering lever system controls your Avenger™ speed (up to the maximum speed set by the speed adjustment dial) as well as the forward and reverse direction. This control system is also called the “Wig-wag”.

To drive forward:

•Please your hands on the handgrips.

•Use your thumbs to operate the control lever.

•User your right thumb to press lightly on the “F” ( forward motion) lever to move your scooter forward.

•Increase the pressure applied by your thumb to increase your forward speed.

•To stop your Avenger™, release all pressure on the lever. The lever will automatically return to the center (neutral) position and your scooter will come to a gradual stop.

Note: Always bring your Avenger™ to a full stop before changing direction from forward to reverse, or from reverse to forward.

To drive in reverse:

•Place your hands on the handgrips.

•Use your thumbs to operate the control levers.

•Use your left thumb to press lightly on the “R” (reverse motion) lever to move your scooter in reverse.

•Increase the pressure applied by your thumb to increase your reverse speed.

•To stop your Avenger™, release all pressure on the lever. The lever will automatically return to the center (neutral) position and your scooter will come to a gradual stop.