Line Keys, Programmable Keys, and Softkeys

Park/Pickup Key Configuration

The programmable method of configuration creates park and pickup keys that you can configure on the 55i phone.

You can set a key as "Park" or "Pickup" and then:

specify a customized label to display on the Phone UI

specify a value

specify which line to use

specify the state of the park and/or pickup keys

On the IP phone UI, the Park/Pickup feature displays the following:

When a call comes in, and you pickup the handset, the custom label that you configured for the Park key displays on the Phone UI.

After the call is parked, the label that you configured for the Pickup key dis- plays on other phones in the network. You can then press the "Pickup" key, followed by the applicable value to pickup the call on another phone in your network.

You can configure a Park and Pickup programmable configuration using the Aastra Web UI.

Key Configuration Using the Aastra Web UI

On the 55i, you configure a Park and/or Pickup key at Operation->Softkeys and XML. You enter a key label, and value for a specific line on the phone. The default state of the Park configuration is "connected". The default state of the Pickup

configuration is "idle, outgoing".

Note: Applicable values depend on the server in your network (Asterisk, BroadWorks, Sylantro, ININ PBX. See the table "Park/Pickup Call Server Configuration Values" on page 91.

92Model 55i IP Phone User Guide

Page 100
Image 100
Aastra Telecom 55i IP Phone manual Park/Pickup Key Configuration, Key Configuration Using the Aastra Web UI