Avenger Owner’s Manual | Revised 06/04/08 |
OPERATION
The TruCharge volt meter/ diagnostics gauge.
This meter shows the amount of voltage in your Avenger™ batteries and is also the diagnostics gauge.
•10 bars lit indicates full battery charge.
•6 or 7 bars lit, charge your batteries.
Note: Your scooter will automatically turn itself off if the battery output falls to 18 V DC or lower.
Tiller Adjustment
The tiller on your Avenger™ scooter employs an adjustment lever to provide you with infinite tiller angle settings. To set the tiller to your liking, follow these directions:
•Use one hand to grasp a handgrip.
•Use your other hand to loosen the adjustment lever.
•Position the tiller to a comfortable driving position.
•Tighten adjustment lever.
NOTE: The length of your Avenger tiller can be extended by the removal of tiller plastic, removal of 2- 6mm machine screws. The tiller can be lengthened by 3” and the replacement of 1 of the 6mm machine screws. (Picture not shown)
WARNING: BE SURE THE TILLER ADJUSTMENT LEVER IS FULLY TIGHTENED BEFORE OPERATING THE SCOOTER.