Avenger Owner’s Manual | Revised 06/04/08 |
ASSEMBLING YOUR AVENGER™
Notice how the front component connects easily to the rear component.
Step 3:
Connect the ball detent pin. Make certain the ball detent pin is fully installed and tightened.
Additional Steps to
Once you’ve joined the front and rear components and connected the ball detent pin, you must:
1.Install the battery pack in the proper location.
2.Connect the motor, brake, battery and charger connections.
3.Replace the battery cover.
4.Install the seat.
5.Position the tiller. WARNING: Make sure you tighten your tiller to be sure it is locked!
6.Unlock your front wheel lock knob. WARNING: If you do not unlock the lock knob, the tiller will not turn. This can lead to a failure to turn when operating your Avenger™.