P 6/17
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Barrel, Tool Holder, Cylinder Section
ASSEMBLY
Do the reverse of the disassembling steps.
Note: Rubber ring 13 is directional when assembled to Impact bolt.
Be sure to assemble as illustrated to left in Fig. 9.
Fig. 9
Correct
Wrong
Impact bolt Rubber ring 13 Flat washer 12
Impact bolt Rubber ring 13 Flat washer 12
Metal portion | Rubber portion |
Rubber portion | Metal portion |
[3] -3. Electrical Parts in Handle Section
DISASSEMBLY
1)Disassemble Handle section as described in Fig. 2
2)The electrical Parts can be replaced as described in Fig. 10.
Fig. 10
1.Disassemble Handle cover from Handle by unscrewing 4x18 tapping screw.
2.Disconnect all the Lead wires from Switch.
Controller, Switch and Power supply cord can now be replaced.
Handle base
Handle |
|
Handle cover | Controller |
| Switch |
| Strain relief |
| 4x18 Tapping |
| screw (1 pc) |
| Power supply cord |
4x18 Tapping screw (1 pc)
ASSEMBLY
Do the reverse of the disassembling steps.