P 9/17
Repair
[3]DISASSEMBLY/ASSEMBLY
[3]-5. Gear (Crank) Section
DISASSEMBLY
1)Disassemble Gear (Crank) section from Crank housing complete as described in Figs. 11 - 14.
2)Gear (Crank) section can now be disassembled as described in Fig. 16.
Fig. 16
1.Stabilizing Bearing box of Gear section on 1R258, remove Crank shaft using arbor press.
2.Remove Helical gear 36 and Flat washer 22 (2 pcs) from Bearing box.
3.Put 1R022 under Bearing box to make Bearing box parallel to arbor press, then apply 1R029 to Oil seal 15.
By pressing down 1R029 with arbor press, Oil seal 15 and Ball bearing 6002LLB can be removed from Bearing box.
Bearing box
1R258
Crank shaft
Helical gear 36 |
| |
Flat washer 22 | 1R029 | |
1R022 | ||
(2 pcs) | ||
| Oil seal 15 | |
| Ball bearing 6002LLU |
ASSEMBLY
Do the reverse of the disassembling steps.
Note: Make sure that O Ring 39 is mounted to Bearing box of Crank section before assembling Crank section to Crank housing complete. (Fig. 14)