I V . A S S E M B L Y
INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or through your Quantum Rehab Specialist.
Seat Installation
Most seats are attached to the power base with the Universal Mounting System (UMS). The UMS consists of universal parts that may be attached to any
NOTE: If your power chair is equipped with a Specialty Seat, Synergy Seat, or
WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose control of the seat if they do so.
SEAT LATCH SAFETY |
REAR EXTRUSION |
FRONT EXTRUSION |
REAR TRAPEZE BAR |
FRONT TRAPEZE BAR |
Figure 10. Seat Installation
Quantum 1402 | www.quantumrehab.com | 21 |