V . C O M F O R T A D J U S T M E N T S | ||
7. Place the controller in the other armrest. |
| |
8. Tighten the setscrew. |
| |
9. Use a wire tie to secure the controller cable to | FOOT PLATFORM | |
the armrest. | ||
BRACKET NUTS AND | ||
10. Plug the controller connector into the electron- | ||
BOLTS | ||
ics tray. |
| |
NOTE: If your power chair is equipped with a Spe- | BALL DETENT | |
cialty Seat, Synergy Seat, or a | PIN | |
Positioning System, refer to the information pro- |
| |
vided in separate manuals. |
| |
Foot Platform Height Adjustment |
| |
The foot platform height is easily adjusted to one |
| |
of six different heights in |
| |
ments. |
| |
To raise or lower the foot platform: |
|
1. Remove the nuts and bolts from the foot plat- | Figure 17. Foot Platform Height/Depth Adjustment |
| |
form bracket. See figure 17. |
|
2.Raise or lower the foot platform to the desired height.
3.Reinstall the bolts and nuts into the foot plat- form bracket and retighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1.Remove the nuts and bolts from the foot platform bracket. See figure 17.
2.Move the foot platform in or out to the desired depth.
3.Reinstall the nuts and bolts into the foot plat-
form bracket and retighten.
Foot Platform Angle Adjustment |
| |
You can adjust the angle of the foot platform with | SETSCREW | |
a hex key. See figure 18. | ||
| ||
To adjust the foot platform angle: |
| |
1. Locate the setscrew on the underside of the foot | Figure 18. Foot Platform Angle Adjustment | |
platform. |
|
2.Turn the setscrew to raise or lower the front of the foot platform.
26 | www.quantumrehab.com | Quantum 1402 |