V . C O M F O R T A D J U S T M E N T S | |
Power Elevating Seat Option |
|
If your power chair is equipped with a power el- | POWER ELEVATING |
evating seat, you can change the seat height auto- | |
matically. The power elevating seat is operated | SEAT SWITCH |
| |
through a switch located on one of the armrests or |
|
on the controller. |
|
To change the seat height using the power el- |
|
evating seat switch on the armrest: |
|
1. Press forward on the power elevating seat switch |
|
to raise the seat. See figure 19. |
|
2. Pull back on the power elevating seat switch to |
|
lower the seat |
|
WARNING! Do not allow the motor |
|
to run more than a few seconds |
|
after the mechanism reaches the |
|
top or bottom limit. |
|
WARNING! The power elevating |
|
seat option is intended for use on |
|
a level surface only. Never raise the |
|
seat from its lowest position on an |
|
inclined surface. Failure to heed | Figure 19. Power Seat Switch |
this warning can result in the | |
power chair tipping over. |
|
WARNING! Never raise the seat from its lowest position when operating your power chair on bumpy or uneven surfaces. Failure to heed this warning can result in the power chair tipping over.
WARNING! Never raise the power elevating seat while your power chair is in freewheel mode.
WARNING! Always fasten the positioning belt when operating the power elevating seat.
NOTE: The power elevating seat option is equipped with a system that reduces the speed of the power chair by one half when the seat is el- evated more than
Quantum 1402 | www.quantumrehab.com | 27 |