V I . C O M F O R T A D J U S T M E N T S
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights. See figure 17.
1.Remove the seat and rear shroud from your scooter. See VII. “Disassembly and Assembly.”
2.Loosen the seat height adjustment nut and remove it from the bolt. Remove the bolt.
3.Loosen the
4.Raise or lower the upper seat post to the desired seat height.
5.While holding the upper seat post at that height, match up the locating holes in the upper seat post with those of the lower seat post.
6.Insert the seat height adjustment bolt through the locating holes of both the upper and lower seat posts.
7.Install the nut onto the bolt and tighten.
8.Tighten the
9.Reinstall the rear shroud and the seat.
MIRROR POSITION
To install the mirror (see figure 18):
1.Determine a side to install the mirror and remove the rubber plug from the top of the tiller handle.
2.Insert the threaded end of the mirror holder into the opening and rotate it clockwise until snug.
3.If necessary, rotate the nut clockwise to secure the mirror in place.
To adjust the mirror:
1.Position yourself in a seated driving position facing forward.
2.Adjust the mirror left, right, up, or down until you have a good line of sight behind you.
UPPER SEAT POST
NUT
LOCATING HOLES
SEAT HEIGHT
ADJUSTMENT
BOLT
NUT
LOWER SEAT POST
Figure 17. Seat Height Adjustment
MIRROR HOLDER |
PLUG |
NUT |
Figure 18. Mirror Installation
32 | www.pridemobility.com | Celebrity X |