|
| V |
| I | I | . |
| M |
| a | i | n |
| t | e | n |
| a | n | c | e |
| & |
| T | r | o |
| u | b | l |
| e | s | h |
| o | o | t | i | n | g |
|
|
|
|
|
|
|
| E n g l i s h | 11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VII. MAINTENANCE & TROUBLESHOOTING
A. MAINTENANCE
You should check the items on this chart at the indicated intervals. If any of the items are loose, worn, bent or distorted, immediately have them checked and/or repaired by your authorized Sunrise supplier. Frequent maintenance and servicing will improve performance and extend wheelchair life.
NOTE– Check weekly, and use a clean, dry cloth or compressed air as needed to keep glide bearings free of debris.
Daily | Weekly | Monthly | Quarterly | Annually | CHECK... |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
✓ |
|
|
|
| Charge batteries |
|
|
|
|
|
|
|
|
| ✓ |
|
|
| Glide bearings free of debris |
|
|
|
|
|
|
|
|
| ✓ |
|
|
| Check tires for proper inflation level |
|
|
|
|
|
|
|
|
| ✓ |
|
|
| Check batteries for proper electrolyte level (wet cell only) |
|
|
|
|
|
|
|
|
|
| ✓ |
|
| Check plugs and connectors for proper connections |
|
|
|
|
|
|
|
|
|
|
| ✓ |
| Check all moving parts for wear |
|
|
|
|
|
|
|
|
|
|
| ✓ |
| Inspect all nuts, bolts and fasteners for looseness or wear |
|
|
|
|
|
|
|
|
|
|
| ✓ |
| Inspect upholstery for wear |
|
|
|
|
|
|
|
|
|
|
| ✓ |
| Remove and inspect motor brushes |
|
|
|
|
|
|
|
|
|
|
| ✓ |
| Check front mount bolts for looseness |
|
|
|
|
|
|
|
|
|
|
| ✓ |
| Check actuator limit switch position |
|
|
|
|
|
|
|
|
|
|
|
| ✓ | Check front mount for excessive wear |
|
|
|
|
|
|
|
|
|
|
|
| ✓ | Servicing by authorized supplier |
|
|
|
|
|
|
|
|
CHECK...
Charge Batteries
Glide bearings free of debris
Check tires for proper inflation level
Check batteries for proper electrolyte
Check plugs and connectors for prope
Check all moving parts for wear
Inspect all nuts, bolts and fasteners for
Inspect upholstery for wear
Remove and inspect motor brushes
Servicing by authorized Supplier
Check front mount bolts for looseness
Check actuator limit switch position
Check front mount for excessive wear
B. TROUBLESHOOTING TIPS
If you should notice your C.G. Tilt system binding up, not running in a smooth fashion, or emitting an unusual noise during use, a foreign matter may have come into contact with the glide bearings. If this occurs, use a clean, dry cloth or compressed air to clear or, if needed, please see your authorized Sunrise supplier.
If your tilt system will not function, check to ensure the tilt
930584 Rev. A