OPERATING THE STAND UP LIFT
Raising/Lowering the Stand Up Lift
To raise the stand up lift, press the up arrow button to raise the lift arms and the patient.
To lower the stand up lift, press the down arrow button to lower the lift arms and the patient.
NOTE: If the stand up lift is in the full Up position, it may be necessary to pull down slightly on the lift arms before the lift arms will lower.
Opening/Closing the Legs
To open the legs, press the legs open button.
To close the legs, press the legs closed button.
Up Arrow | Down Arrow | |
Button | ||
Button | ||
| ||
Legs Open | Legs Closed | |
Button | Button |
FIGURE 3.1 Pendant Buttons
Performing an Emergency Stop
NOTE: For this procedure, refer to FIGURE 3.2.
Press the RED emergency button on the control box to stop the boom assembly and patient from raising or lowering.
Rotate the RED emergency stop button clockwise to disengage the emergency stop.
| Rotate Clockwise to |
Control Box | Disengage Emergency Stop |
Press IN to
Stop Boom
FIGURE 3.2 Performing an Emergency Stop
Part No. 1145811 | 19 | Stand Up Lift Model |