MAINTENANCE
Replacing the Mast Actuator
CAUTION
DO NOT overtighten the nut and bolt. This damages the mounting bracket.
NOTE: For this procedure, refer to FIGURE 7.6.
1.Remove the bottom nut, washer and shoulder bolt that secure the mast actuator to the mast mounting bracket.
2.Rest the lift arm on your shoulder and remove the top nut, bolt, bracket and bushing from the lift arm mounting bracket.
3.Remove the mast actuator.
4.Reverse the above steps for installation of the new mast actuator.
Top Nut
Bracket
Lift Arm Mounting Bracket
Top Bolt
Bushing
Mast Actuator
Shoulder Bolt | Bottom Nut |
| |
| Washer |
| Mast Mounting Bracket |
FIGURE 7.6 Replacing the Mast Actuator
Part No. 1145811 | 35 | Stand Up Lift Model |