Invacare RPS350-2 manual Replacing the Knee Pad, Replacing the Padded Cover

MAINTENANCE

Replacing the Knee Pad

NOTE: For this procedure, refer to FIGURE 7.4.

1.Remove the four button screws and washers that secure existing knee pad to the stand up lift.

2.Remove the existing knee pad from stand up lift.

3.Position the mounting holes in the new knee pad with the mounting holes in the stand up lift.

4.Using the existing hardware, secure the new knee pad to the stand up lift.

Knee Pad	Stand Up Lift
	Washers

FIGURE 7.4 Replacing the Knee Pad

Replacing the Padded Cover

NOTE: For this procedure, refer to FIGURE 7.5.

1.Pull fastening strips on the existing padded cover apart.

2.Remove the existing padded cover from the lift arm.

3.Position the new padded cover around the lift arm.

4.Secure fastening strips on the new padded cover together.

FIGURE 7.5 Replacing the Padded Cover

Stand Up Lift Model RPS350-2 34 Part No. 1145811